Please wait, your selection is being loaded.
Please wait, your selection is being loaded.
An error has occurred. Please try again.
The item you selected is no longer available.
We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage » USB » USB Extension
HDBaseT USB3 certified
This Lindy USB 3.2 Gen 1 HDBaseT Extender can be used to extend the distance between USB peripheral devices and 2 host computers by up to 100m. Supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A standard Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft). It's also possible to reach up to 40m using a Cat.6 cable.
The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The Transmitter has 2 switchable host ports, one Type C and one Type B, with additional local device ports; 4 ports on the Receiver can provide 5V power as well to the connected devices: 2 Type A ports support up to 1.5A each, 1 Type A and 1 Type C ports support up to 1A each.
Status LEDs help the user to check power, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras. It's also possible to control the extender via API commands.
With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments.
In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
*: To cover long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or above) cables.
This extender is certified by HDBaseT Alliance.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
Specifications
Connectors
Physical Properties
Miscellaneous
Package Contents
Purchasing Information
SECTION 1 - HERO HEADLINE
The Lindy 100m Cat.6A 2 Host USB 3.2 Gen 1 HDBaseT® Extender is a professional USB extension solution for connecting two host systems to remote USB peripherals over distances up to 100m using standard Cat.6A network cabling.
SECTION 2 - FEATURE CALLOUT
Designed for professional and industrial environments, this extender transmits USB 3.2 Gen 1 signals from two host computers to remote peripherals over Cat.6A cabling up to 100m. With Power over Cable, Plug & Play installation, API control and RS-232 and FSYNC pass-through, it provides a flexible and reliable solution for demanding USB extension applications.
SECTION 3 - AT A GLANCE
Extend USB up to 100m
Long-distance USB 3.2 Gen 1 transmission over Cat.6A.
Dual-host connectivity
Connect and switch between two host systems.
Single power supply design
Power over Cable reduces installation complexity.
Plug & Play
operation
Quick setup for professional environments.
SECTION 4 - KEY BENEFITS
Long-distance USB 3.2 Gen 1 extension
Extend USB signals from two host computers to remote peripherals up to 100m over Cat.6A cabling, with support for up to 5Gbps data transfer.
Flexible dual-host connectivity
The transmitter features two host ports, one USB Type C and one USB Type B, making it easy to connect and manage multiple systems from a single remote setup.
Reliable peripheral power delivery
Receiver-side USB ports can provide additional power to connected devices, supporting a range of peripherals in professional and industrial applications.
Simplified installation with Power over Cable
A single power supply connected to either the transmitter or receiver powers the system, helping reduce cable clutter and simplifying deployment.
Advanced control and pass-through support
RS-232, API and FSYNC GPIO pass-through provide integration with industrial cameras, control systems and specialist installations requiring bi-directional commands.
Built for demanding professional use
Robust metal housings, mounting brackets, status LEDs and a secure screw-type DC power connector ensure dependable operation in professional installations.
SECTION 5 - TYPICAL APPLICATIONS
Ideal for industrial control systems, professional workstation environments, specialist imaging setups and other demanding USB extension applications, this extender provides reliable long-distance connectivity for dual-host systems and remote USB devices.
SECTION 6 - TECHNICAL SUMMARY
The Lindy 100m Cat.6A 2 Host USB 3.2 Gen 1 HDBaseT® Extender supports USB 3.2 Gen 1 with data transfer rates up to 5Gbps and extends signals up to 100m over Cat.6A or higher network cable. It is also backwards compatible with USB 2.0 and USB 1.1, and supports control, bulk, interrupt and isochronous data transfer.
The transmitter includes USB Type B and USB Type C host inputs, local USB ports and an RJ45 HDBaseT® output, while the receiver provides one USB Type C and three USB Type A outputs for remote device connections. Additional control features include RS-232, API and FSYNC support, with status LEDs for power, link and data activity monitoring.
Housed in durable metal enclosures measuring 140x75x23mm per unit, the extender is designed for reliable use in professional environments. Power over Cable, Plug & Play installation and a secure screw-type DC power connection help simplify deployment, while HDBaseT® certification ensures dependable long-distance performance. The unit is backed by a 2-year warranty.
If you leave this field empty we will send to the email address you logged in with.
