Ideal for digital signals, audio and video presentations.

These extenders support data transmission in the following modes: "1 to 1", "1 to many", and "many to many".

• HDMI Full HD 1080p and HDCP compatible
• The transmitter and receiver can be connected via a dedicated Cat.5e/6 RJ45 cable up to 120m in length or via an Ethernet network with up to three layers
• Simply connect to power, connect the transmitter to the signal source with the HDMI cable, and connect the receiver to the monitor or projector
• For information about network requirements, see Technical details

This extender transmits compressed signals in Full HD 1080p resolution. For motion video the compression is almost invisible. For presentations and static desktops a loss of sharpness similar as known from JPEG photo compression can be recognized.

The HDMI distribution solution offering the best value for money

Function

• The extender sends HDMI signals with HDCP and Audio digitally in full 1080p resolution. It has a lightweight, scarcely noticeable form
• The transmitter and receiver can either be connected 1:1 via a Cat.5e/6 RJ45 cable up to 120m in length or via an Ethernet network with up to three layers
• 1:n and n:n connections require Ethernet. Always use one separate network or a segment separated by a VLAN connection per transmitter.

HDMI support

• Supports HDTV resolutions up to Full HD 1080p and 8 Bit colour depth, with HDCP
• 3D is not supported
• Transmitter with HDMI input
• Receiver with HDMI output

Ethernet support

• Transmitter and Receiver each with RJ45 sockets and 100BaseT interface
• The network components and switches in use must support the broadcast protocol, otherwise the attempt to connect may fail and fault-free operation cannot be guaranteed.
  Note: some older configurable switches have not implemented the broadcast protocol correctly. In such cases, the attempt to connect will fail
• WIFI routers in home networks do NOT normally offer suitable protocol support!

IR remote control support

• Also supports IR remote control signals (38kHz***, range 940 nm)
• IR receiver cable for connection to receiver
• IR transmitter cable for connection to transmitter

Device specifications

• Metal housing
• Power and status LEDs
• Dimensions approx. 9.5 x 10.5 x 2.5 cm of transmitter or receiver respectively
• Weight approx. 0.3kg for transmitter or receiver respectively, total weight approx. 0.5 kg incl. packaging

Included in the delivery

• Transmitter (No.38127) or receiver (No.38128)
• IR remote control TX/RX cable
• Universal power supply 100...240VAC / 5VDC ~1A, with adapters for Euro-, US-, UK- and Australian power outlets
• Multilingual manual

*** Many of the various Sky receivers use IR remote controls in the 20kHz range - these are not supported

***This extender transmits compressed signals in Full HD 1080p resolution. For motion video the compression is almost invisible. For presentations and static desktops a loss of sharpness similar as known from JPEG photo compression can be recognized.