Hidden Category Shop

Your filter options:

Connections

You are here: » Homepage

Heavy-Duty Shelf for LINDY Upright Cabinets, 550 mm

High load-bearing capacity- the heavy duty shelves for LINDY 19" upright enclosures A wide range of heavy-duty shelves of various depths are available for current LINDY upright cabinets and open rack panels.

No.: 22378

Heavy-Duty Shelf for LINDY Upright Cabinets, 750 mm

No.: 22380

Network Switch - 24 Port 10/100Base-TX + 2 Port 10/1000Base-T, N-Way

This product has been discontinued and replaced by Part No 25009.

24 Port Fast Ethernet 10/100 and 2 Port Gigabit Ethernet 10/100/1000 network switching hub
Supports Gigabit over copper - RJ-45, CAT5e and higher
Gigabit uplink ports for connection to your main servers or network backbone switches
Fast Ethernet ports for connecting your workstations
Auto MDI/MDI-X function on each port - no need for crossover cables

No.: 25003

Network Switch - 8Port 10/100/1000Base-TX + 2 Port Mini GBIC Managed Switch

This product has been discontinued and replaced by Part No 25028.

This high performance managed SNMP switch provides users with 8 Gigabit Ethernet 10/100/1000Mbit/sec ports and 2 shared Mini GBIC ports. Its management function can be accessed via an out of band RS-232 terminal port connection and also via in-band IP access from a local or remote location.

This switch is suitable for enterprise companies or SOHO users who want to build up a high speed network or backbone. With single-mode or multi-mode fibre transceivers you can link remote users or share remote resources. A web interface management facility provides control capability over TCP/IP. This makes operation easy to manage with a browser at the local or remote side.

Fully manageable network switching hub with access via RS-232 console port or IP
8 x 10/100/1000Base-TX RJ-45 Gigabit Ethernet ports, 2 are shared with the Mini GBIC ports
2 x Mini GBIC slots for Gigabit Ethernet LC fibre modules (LINDY Part No. 25011)
Up to 8K MAC entries
144KB packet buffer
19" standard rackmount size (brackets included)

No.: 25004

Network Switch - 24 Port 10/100/1000Base-TX + 2 Port Mini GBIC Managed Switch

This product has been discontinued and replaced by Part No 25026.

This high performance managed SNMP layer 2 switch provides users with 24 Gigabit Ethernet 10/100/1000Mbit/sec ports and 2 shared Mini GBIC ports. Its management function can be accessed via an out of band RS-232 terminal port connection and also via in-band IP access from a local or remote location.

Fully manageable layer 2 network switching hub with access via RS-232 console port or IP
24 x 10/100/1000Base-TX RJ-45 Gigabit Ethernet ports, 2 are shared with the Mini GBIC ports
2 x Mini GBIC slots for Gigabit Ethernet LC fibre modules
SNMP / RMON support for network analysis and monitoring
Up to 8K MAC entries and 4K VLAN entries
400KB packet buffer
19" standard rackmount size (brackets included)

No.: 25012

Network Switch - 16 Port, 10/100Base-TX Fast Ethernet, N-Way

This product has been discontinued and replaced by Part No 25009.

16 x 10/100Base-TX RJ-45 Fast Ethernet port network switching hub
Standards: IEEE 802.3 (10Base-T), 802.3u (100Base-TX)
Auto Negotiation support for each port
Auto MDI/MDI-X for each port
Full/Half-duplex operation
Bandwidth: 100Base-TX 200Mbit/sec, 10Base-T 20Mbit/sec
Forwarding/Filtering Rate:148810 packets per port @ 100Mbit/sec max, 14881 packets per port @ 10Mbit/sec max
MAC Addresses: 8K entries maximum, self learning
LED Indicators: Power x 1, Link/Activity x 16
10"/1U metal case (19" rackmount kit included)
Dimensions: 270 x 170 x 44mm (WxDxH)
2 Year Warranty

No.: 25017

Network Switch - 24 Port Gigabit Ethernet

This product has been discontinued and replaced by Part No 25026.

Simple and easy to install, the LINDY 24 Port Gigabit Ethernet Switch is great value providing high quality performance with full Gigabit connections on all ports.

The switch is suitable for small, medium or enterprise companies who require a high speed network or backbone. It's the ideal upgrade from a Fast Ethernet solution as it is backwards compatible with all existing 10/100 network equipment and features flow control and auto-negotiation to sense the correct speed and full/half duplex mode. With Auto MDI/MDI-X functionality on all ports there is no need for cross over cables.

24 Port Gigabit Ethernet network switching hub
All ports support 10/100/1000 Base-T connections
Supports Gigabit over copper - RJ-45, CAT5e and higher
19" 1U rack design (19" mounting brackets included)
Realtek chipset

No.: 25027

10GBase-SR SFP+ LC Module (Multimode)

Supports 10G Ethernet
Standard SFP+ module form factor (CISCO and HP compatible)
Duplex LC Connector
850nm wavelength (Multimode only)
2 Year Warranty

The LINDY Transceiver Module allows a 10 Gigabit fibre optic connection to your network. Simply connect this 10GBase-SR module to your 10G Ethernet switch with a multimode LC duplex cable for quick and easy connectivity.

Standard SFP+ Module for common networking systems like Cisco, HP, Dell, Ubiquiti, D-Link, Zyxel, Netgear, Arista, Juniper or for mainboards with SFP+ slots like SuperMicro, Asus, Gigabyte and Asrock.

The module is built to comply with MSA (Multi Sourcing Agreement) standards and uses the industry standard LC interface to extend your network connectivity up to 400m. It is also is fully hot pluggable, which enables you to install it without powering down your network switch and interrupting traffic flow.

Please note: This module is only compatible with 10G switches. 1G or 10/100 switches are not supported.

No.: 25037

10GBase-LR/LW SFP+ LC Module - Single Mode

This product has been discontinued and replaced by Part No 25039.

Supports 10G Ethernet
Standard SFP+ module form factor (CISCO and HP compatible)
Duplex LC Connector
1310nm wavelength (Singlemode only)
2 Year Warranty

The LINDY Transceiver Module allows a 10 Gigabit fibre optic connection to your network. Simply connect this module to your 10G Ethernet switch with a singlemode LC duplex cable for quick and easy connectivity.

The module is built to comply with MSA (Multi Sourcing Agreement) standards and uses the industry standard LC interface to extend your network connectivity up to 10Km. It is also is fully hot pluggable, which enables you to install it without powering down your network switch and interrupting traffic flow.

Please note: This module is only compatible with 10G switches. 1G or 10/100 switches are not supported.

No.: 25038

8 Port + 2 SFP Gigabit Managed Switch

Add 8 Gigabit ports to a network infrastructure using a convenient fibre uplink via 2 SFP slots
Professional Layer 2 management features for superior network traffic optimisation and control
Features Jumbo Frame support and IGMP snooping for effective AV Over IP installation integration
DDM for consistent critical information monitoring of the transmitted and received signals
2 Year Warranty

This advanced Lindy 8 Port Gigabit switch provides a high performance, intelligent expansion to a distributed IP network, while utilising dual SFP module slots for longer distance uplink, ideal for larger scale or multi-building installations.

Supporting full Layer 2 management, traffic can be separated and managed effectively via advanced VLAN features, alongside QoS for independent traffic prioritisation and IGMP Snooping for optimised multicast stream listening, while the user can efficiently control the network via Web Gui, Telnet or command line. Featuring virtual stacking, this switch can also be integrated alongside multiple switches for even larger scale installations, while controlled and managed as a single switch.

Optical Digital Diagnostic Monitoring support also ensures the user is provided with consistent critical information regarding the status of both the transmitter and received signals, ensuring faults can be identified and resolved with minimum disruption to the system.

No.: 25047

16 Port + 2 SFP Gigabit Managed Switch PoE

Add 16 Gigabit ports to a network infrastructure using a convenient fibre uplink via 2 SFP+ slots, while providing power to compatible devices using PoE
Professional Layer 2 management features for superior network traffic optimisation and control
Features Jumbo Frame support and IGMP snooping for effective AV Over IP installation integration
DDM for consistent critical information monitoring of the transmitted and received signals
2 Year Warranty

This advanced Lindy 16 Port Gigabit switch with PoE provides a high performance, intelligent expansion to a distributed IP network, while utilising dual SFP+ module slots for longer distance uplink, ideal for larger scale or multi-building installations. All RJ-45 ports are PoE IEEE 802.3at/af compliant providing up to 30W of power to compatible devices, simplifying the whole installation.

No.: 25048

8 Port PoE Gigabit Web Smart Switch

This product has been discontinued and replaced by Part No 25051.

This compact high performance PoE switch provides users with 8 Gigabit Ethernet 10/100/1000Mbit/sec PoE ports. The eight fast Ethernet ports can supply industry standard IEEE 802.3af power for use with any compatible PoE device, such as wireless access points and IP based surveillance cameras. Its management function can be accessed via an out of band RS-232 terminal port connection and also via in-band IP access from a local or remote location using a simple web browser interface.

This switch is suitable for enterprise companies or SOHO users who want to build up a high speed network. A web interface management facility provides control capability over TCP/IP. This makes operation easy to manage with a browser at the local or remote side. Gigabit over copper using RJ-45, CAT5e or higher cable.