• Compact 19" 1U rackmount size design, allows control of up to 16 PCs from one keyboard, monitor and mouse
• Supports very high quality video up to 1920 x 1440 and bandwidth over 200MHz
• Support for LINDY mice, Microsoft Intellimouse, Microsoft Intellimouse Explorer, Logitech Net Mouse or other fully compatible MS mouse
• All ports are active simultaneously - the connected PCs may all be booted at the same time
• Keyboard status automatically restored when switching between connected PCs
• Eight character password protection prevents unauthorised use
• Hot plug support, connect PCs or remove connected PCs for maintenance without powering down the KVM switch or PCs
• No software required, easy PC selection via On-Screen Display menu, push buttons or keyboard hotkeys
• Auto Scan Mode for monitoring PCs, with adjustable scan rate from 5 to 99 seconds
• Front panel LED indicators for easy status monitoring
• Built-in audible buzzer confirms port switching
• Dedicated daisy chain port allows up to 8 CPU switches to be daisy chained together, allowing up to 128 PCs to be connected without the loss of any CPU ports
• 16 port model uses special KVM cables (Part No. 32506 - 2m, Part No. 32507 - 3m and Part No. 32508 - 5m)
• Can be rackmounted in a 19" enclosure (brackets supplied)
• Supplied with mains power adaptor
• Compatible with all common operating systems such as Windows 3.x/95/98/ME/NT/2000/XP, DOS, NetWare, UNIX and Linux

• Features 16 combined PS/2 & VGA computer ports
• PS/2 & VGA KVM console control port
• On-Screen Display (OSD) menu system for easy control and configuration
• Ports can be switched using keyboard, mouse, on-screen display or the front panel button
• Password protection to prevent unauthorised use
• Supports display resolutions up to 1920 x 1440
• Compatible with all major PC operating systems
• 2 year warranty

• 16 Port KVM switch in a 1U 19" rackmount size case
• Supports local console control and remote access via IP
• Remote mass storage device support
• Built-in daisy chain port allows up to 8 additional LINDY P-series KVM switches to be connected
• Features PS/2 and VGA computer and console connections
• Supports PCs, Macs and SUN computers (adapter cable required for each USB computer)
• 2 year warranty

• Very easy to install - simply connect the cables
• Maximum resolution supported: 1920x1200@60Hz or 1600x1200@60Hz
• The receiver delivers a MONO Audio signal (Stereo left and right channels are combined by the transmitter unit)
• Gain and Peak regulation dimmers on the receiver unit to improve quality over longer distances
• 2 year warranty

This VGA Extender transmits VGA and audio signals through CAT5e network cables over distances of up to 300m when using high-quality solid core network cable.

Easy to install, the Extender system is made up of local transmitter and remote receiver units that are connected together with CAT5e cable (not included), high quality solid core installation cable is recommended. The local transmitter unit connects to the computer system's VGA port, with a VGA output available to connect a local monitor, while the receiver unit connects to your remote monitor or projector.

The extender includes both Gain and Skew controls to allow you to adjust the brightness and sharpness of the picture according to your requirement.  

Both Extender units are housed in sturdy metal casings, making them ideally suited to use in factories and other industrial applications.

Please Note:

Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.

• Sends VGA signals up to 750m using OM3 LC fibre optic cable
• Transmits high-resolution VGA signals up to 1920 x 1200
• Supports Stereo Audio transmission
• Consists of a transmitter and receiver unit
• 2 year warranty

The LINDY VGA & Audio Extender sends signals over two standard LC duplex fibre optic cables with no loss of quality or signal degradation from compression artefacts or electromagnetic interference. This means it is highly suited to the demanding standards required from professional signal transmission in the medical, military, and presentation industries.

Please note: This product requires 2x LC Duplex cables or 4 core LC cables in either OM2 or OM3.

Package Contents:

VGA & Audio Transmitter unit

VGA & Audio Receiver unit

2 x Multi-Country power supply (5VDC)

Manual

• Converts a VGA signal to a Composite Video signal
• Simple Plug & Play operation - no special software or drivers required
• Supports both NTSC and PAL formats
• Compact, lightweight design powered via USB
• 2 Year Warranty

The LINDY VGA to TV Converter Lite enables the easy connection of a VGA equipped PC, Mac or games console to a legacy display or projector. The converters lightweight, compact construction makes it easy to locate in tight spaces, whilst its plug and play operation makes installation simple. A small switch on the side of the unit allows the output video format to be set to NTSC or PAL according to the specification of your display.

Package Contents:

VGA to TV converter

USB power A/mini-B cable ~ 0.8m

LINDY manual

• "Plug & Play" - no software required
• Extremely compact size for complete portability - 120 x 100 x 24 mm (WxHxD)
• PC and Mac compatible
• Simultaneous display on monitor and TV screen
• Supports resolution up to 1280 x 1024
• Refresh rate up to 150Hz
• Flicker reduction technology
• Zoom and Pan function
• Composite video, S-VHS and RGB SCART output
• Vertical and Horizontal scaling to fit TV display
• Supports PAL format

• Duplicates a VGA signal from a PC to 2 VGA monitors, providing simultaneous viewing
• Supports resolutions up to 2048x1536 (QXGA)
• Cascadeable up to 3x for larger installations
• Enhances the video signal up to 55m for longer distance broadcasting via cascading
• 2 Year Warranty

The Lindy 2 Port VGA Splitter is a professional solution for splitting PC video content across two separate VGA displays, with simultaneous playback.

Supporting resolutions up to 2048x1536, this splitter is perfect for engaging educational installations, eye catching digital signage or display testing that utilise legacy PC’s and monitors. This splitter is also cascadeable up to three layers, allowing for much larger display installations, all showing the same content from one VGA source device.

Please note: distances may vary on the quality of the cable used within the installation

• Monitors: HD-15 female
• USB to the console: 2x type A female
• USB to computer, each 2x type B female

• Easily connect Composite & S-Video source devices to a VGA Display
• PAL & NTSC video formats supported
• Scales output resolution up to 1920x1200@60Hz
• Mini USB powered
• 2 Year warranty

The Lindy Composite / S-Video to VGA Converter is a simple solution for connecting Composite video or S-Video source devices such as CCTV digital video recorders, legacy video players & games consoles to a VGA display or projector.

An integrated scaler dynamically converts the Composite or S-Video input signal and scales it to multiple output resolutions including Full HD, which can be easily selected using a simple push button, coupled with its support for both PAL and NTSC video formats ensures maximum compatibility with VGA displays or projectors.

It’s professional, compact design and its low power requirement through mini USB make it ideal for any installation, especially where space and power outlets are limited such as CCTV control cabinets or rooms.

• Provides environment temperature and humidity information
• Supported Temperature Range: 0°C – 50°C (0°F – 122°F)
• Supported Humidity Range: 0 – 100% RH (non-condensing)
• Uses an external RJ11 interface
• 2 Years Warranty

This temperature & humidity sensor for  Lindy IPower Switch Pro 8 provides reliable information about the environment temperature and humidity. The small form factor and a 1.8m (5.91ft) long cable allows a flexible and discreet installation.