• Supports HDMI and DVI equipped devices, e.g. computers, DVD players, set top boxes etc, HD TVs, projectors etc.
• Supports HDTV resolutions: 480i, 576i, 480p, 576p, 720p and 1080i
• When used with computers, supports DVI-D resolutions of up to 1600 x 1200 and WUXGA (1920 x 1200) @ 60Hz
• Transmitter:
• Input Ports: 2 x HDMI Female
• Output Port: 2 x RJ-45
• Receiver:
• Input Ports: 2 x RJ-45
• Output Port: 1 x HDMI Female
• Device selection by push button
• Channel select LED
• Supports High Definition audio, Dolby Digital True HD and DTS-HD
• Dimensions (each unit): 70 x 82 x 27mm (WxDxH)

• Allows DVI-D video signals to be sent up to 30m using low cost (not included)
• Supports HDTV resolutions of 480i, 576i, 480p, 576p, 720p and 1080p
• HDCP not suported
• Dimensions: 4 x 5 x 2.5cm (WxDxH)
• 2 year warranty

• Allows DVI-D signals to be transmitted at distances of up to 80m using LINDY DVI Super Long Distance cables
• Supports resolutions of up to 1920 x 1200 and HDTV 1080p
• HDCP signal support
• No power supply is required for most installations as the module takes its power from the DVI interface
• An optional 5V DC PSU (1mm/3mm inner/outer diameter) can be used when the source device cannot supply a sufficiently high quality, stable DVI signal (for example, some older graphics cards)
• Dimensions: 75 x 55 x 20mm (WxDxH)

• USB Type A Male connector with 1.8m straight cable
• Optical System: 1500 Pixel CCD sensor
• Resolution : 0.1mm(4mil)
• Scan Speed : 200 Scans/sec
• Scan Angle : 45°
• Scan Width : Up to 80mm
• Decodable Capability: 1D Barcodes
• Weight : 95g 
• Dimension : 160x80x20 (LxWxH)
• Material : ABS + Rubber
• Color: Black
• Cable Length: 1.7m (5.58ft)
• RoHS, CE and FCC approved
• 2 year warranty

• 24K gold plated connectors for maximum signal integrity and resistance to tarnishing and corrosion
• Robust and stylish alloy connector hood with 360° shielding - ideal for use in industrial and AV applications
• Uses superior quality 99.9% (OFC) oxygen-free copper wire to maintain reliable high speed data transfer
• Shielded cable design reduces RF interference
• Fully compatible with PCs, Macs and all other USB equipped devices
• Supports the highest USB 2.0 data transfer speeds of up to 480Mbps
• Connectors: USB Type A Male to Type Mini-B Male
• 25 year warranty

This superior quality USB 2.0 cable has been designed for users who value stylish design and superb build quality.

It features 24K gold plated contacts for excellent signal transfer and tough alloy connector hoods for maximum reliability. It's the ideal choice for industrial, design, demonstration and AV installations.

• Gold Plated 15 Way HD Male to 15 Way HD Female
• Designed for highest quality monitor applications, including CAD, DTP and Multimedia installations when preservation of display is a major consideration
• Triple shielded 'low loss' coaxial cable, gold plated contacts and gold plated metal hoods assembled in accordance with 'EMC' compatible construction techniques
• Incorporating secondary internal screening which provides a high degree of EMI shielding with clearer signal transmissions and minimum distortion
• Supports all VGA and SVGA resolutions up to 2048 x 1536 (WQXGA)
• 25 year warranty

• To be used in conjunction with the LINDY Extender, 4 or 8 port HDMI C6 Splitters
• Extend an uncompressed HDMI/DVI signal to multiple displays at distances of up to 70m
• Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth
• Supports 3D, including 1080p 3D
• Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
• Allows the remote control of equipment via IR
• Connect using CAT6 RJ-45 cable
• IR Frequency range 33-50kHz
• Simple plug and play installation
• HDBaseT Alliance 5Play

Important: The HDBaseT/HDMI C6 RJ-45 ports on this receiver must never be connected to a LAN as this will cause the extender to fail.

This HDBaseT Face Plate Receiver is to be used with our range of HDBaseT Splitters and are perfect for home cinema or professional AV installations, capable of extending Full HD 1080p, including 3D to 8 displays at distances of up to 70m using a single CAT 5e/6/7 cable. It is also able to extend infrared signals, allowing AV equipment to be controlled up to 70m away.

To extend HDBaseT HDMI signals up to 100m use the LINDY HDMI C6 Receiver (Art. 38118).

Package Contents:

HDBaseT Receiver for HDMI

5V DC 2.6A Screw Type Multi County PSU (with Euro, US, UK & Australian/China AC connectors)

IR Receiver with 3.5mm connector, ~1.4m

IR Emitter with 3.5mm connector, ~1.4m

LINDY Manual

Please Note:

For larger distances up to 300m/450m, we recommend our HDMI Fibre Optic Extender.

• Distributes HDMI resolutions up to 100m over Cat.6 network cable via HDBaseT technology
• Supports HDMI 10.2G resolutions up to 4K@60Hz 4:2:0
• RS-232 & CEC pass-through, bi-directional IR for simple control & integrated 3 port Ethernet hub for LAN access
• Supports PoH (Power over HDBaseT), requiring a power supply connection from only one side of the installation
• 2 year warranty

The 100m Cat.6 HDMI, IR & RS-232 HDBaseT Extender with PoH & Ethernet Hub is an end to end, premium solution for extending HDMI signals over long distances via Cat.6 network cable, while also providing an integrated 3 port Ethernet hub in either unit.

The following distance and resolution combinations are possible when using high quality Cat.6 U/UTP or F/UTP cable:

100m: 1920x1080@60Hz 4:4:4 8bit

70m: 3840x2160@60Hz 4:2:0 8bit / 30Hz 4:4:4 8bit

Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, providing a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls. A HDMI loop out port on the transmitter also allows for connection of a local display for monitoring, great for control room and CCTV installations.

PoH (Power over HDBaseT) functionality provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter unit. Ideal when power outlets are limited at the receiver end of the installation.

Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. Combined with CEC control, which allows commands from one main remote, this extension system allows for complete and simple control for the user. RS-232 pass-through also allows for integration into larger control systems.

The integrated 3 port Ethernet hub at both the transmitter and receiver units, can be connected easily to standard network devices including routers, network switches or larger hubs for simple access over LAN.

In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.

HDBaset is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.

HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

Please Note: The local HDMI output of the Transmitter may not be used at the same time as the HDBaseT connection

• Extend an uncompressed HDMI/DVI signal to 4 displays at distances of up to 100m
• One HDBaseT Receiver (Art. 38118) is required for each display
• Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth
• Supports 3D, including 1080p 3D
• 4K 3840 x 2160p24 support
• Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
• Allows the remote control of equipment via IR
• Integrated 2 port 10/100 ethernet hubs in both the transmitter and receiver units
• IR Frequency range 33-50kHz
• Simple plug and play installation
• HDBaseT Alliance 5Play

Important: the HDBaseT RJ-45 ports on this splitter must never be connected to a LAN as this will cause the extender to fail

Perfect for home cinema or professional AV installations, the HDBaseT Splitter is capable of extending Full HD 1080p, including 3D to 4 displays at distances of up to 100m using a single CAT 5e/6/7 cable. The HDBaseT Splitter is also able to extend infrared signals, allowing AV equipment to be controlled up to 100m away. An integrated Ethernet hub also allows you to conveniently connect PC/MAC, NAS, Wireless Access Point and other network equipment over the same single CAT 5e/6/7 cable.

Package Contents:

4 Port HDBaseT Splitter for HDMI

12V DC 4A PSU with UK power cable

IR Emitter with 3.5mm connector, ~1.4m

LINDY Manual

Please Note:

For larger distances up to 300m/450m, we recommend our HDMI Fibre Optic Extender

• Extend an uncompressed HDMI/DVI signal to 8 displays at distances of up to 100m
• A HDBaseT Receiver is required for each display
• Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth
• Supports 3D, including 1080p 3D
• Supports 4K (3840x2160) @ 30Hz
• Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
• Allows the remote control of equipment via IR
• Connect using CAT6 RJ-45 cable
• Integrated 2 port 10/100 ethernet hubs in both the transmitter and receiver units
• IR Frequency range 33-50kHz
• Simple plug and play installation
• HDBaseT Alliance 5Play

Important: the HDBaseT RJ-45 ports on this splitter must never be connected to a LAN as this will cause the extender to fail

Perfect for home cinema or professional AV installations, the HDBaseT Splitter is capable of extending Full HD 1080p, including 3D to 8 displays at distances of up to 100m using a single CAT 5e/6/7 cable. The HDBaseT Splitter is also able to extend infrared signals, allowing AV equipment to be controlled up to 100m away. An integrated Ethernet hub also allows you to conveniently connect PC/MAC, NAS, Wireless Access Point and other network equipment over the same single CAT 5e/6/7 cable.

Package Contents

8 Port HDBaseT Splitter for HDMI

12V DC 4A PSU with UK power cable

IR Emitter with 3.5mm connector, ~1.4m

LINDY Manual

Please Note:

For larger distances up to 300m, we recommend our HDMI Fibre Optic Extender