• Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
• Ideal for use as an LCD monitor cable or DVI projector cable
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
• Ideal for use as an LCD monitor cable or DVI projector cable
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
• Ideal for use as an LCD monitor cable or DVI projector cable
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
• Ideal for use as an LCD monitor cable or DVI projector cable
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

Important!

Please note that cable lengths over 7.5m are above the recommended length laid down by the DDWG organisation who developed the specification. This factor also depends on the hardware combination of graphics card and monitor as to how far this distance can be exceeded.

• Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
• Ideal for use as an LCD monitor cable or DVI projector cable
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Full CAT6 specification with moulded snagless boots
• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• Full CAT6 specification with moulded snagless boots
• Snagless strain relief prevents damage to the RJ-45 latch during installation and removal

• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• Full CAT6 specification with moulded boots

• Snagless strain relief prevents damage to the RJ-45 latch during installation and removal

• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• Full CAT6 specification with moulded snagless boots
• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• Full CAT6 specification with moulded snagless boots
• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one