• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

Important!

Please note that cable lengths over 7.5m are above the recommended length laid down by the DDWG organisation who developed the specification. This factor also depends on the hardware combination of graphics card and monitor as to how far this distance can be exceeded.

• DVI-D Dual Link Extension Cable
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
• Increased insulation resistance up to 25%
• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
• Tight fit of internal wires as there is no inner mould
• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
• Smaller overall dimensions which allows more room behind the host or peripheral
• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Full CAT6 specification with moulded boots

• Snagless strain relief prevents damage to the RJ-45 latch during installation and removal

• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• 2 Way Digital Optical Audio Splitter
• Supports cables distances of up to 5m in and 5m out (for each output)
• Input ports: 1 x TosLink (Optical Fibre)
• Output port: 2 x TosLink (Optical Fibre)
• Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) digital audio signal output
• Supports compressed 2-channel and multi-channel Dolby and DTS audio signals
• Includes 5V DC multi country power supply
• Dimensions: 46 x 46 x 24mm (WxDxH)
• 2 year warranty

Please note: TosLink cables are not included, we recommend you use cables from the LINDY or cable range

2 Way TosLink Switch, SPDIF to Analogue and Analogue to SPDIF converters are also available.

• Full CAT6 specification with moulded snagless boots

• Snagless strain relief prevents damage to the RJ-45 latch during installation and removal

• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• Full CAT6 specification with moulded snagless boots

• Snagless strain relief prevents damage to the RJ-45 latch during installation and removal

• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• Distribute signals across 4 DP displays
• Supports resolutions up to 2560x1600
• Supports digital audio pass-through
• Metal housing
• 2 Year Warranty

The Lindy 4 Port DisplayPort 1.1 Splitter is a high-end solution for sharing DP signals across 4 displays.

Supporting resolutions up to 2560x1600, this splitter is ideal for use in premium DP distribution setups when providing information to a wider audience with greater coverage, such as digital signage in retail or informative displays in university libraries. Digital audio up to 7.1CH is seamlessly passed through for immersive multi-channel audio to support the video content.

The LINDY DisplayPort Splitter allows you to send a DisplayPort signal to two DisplayPort monitors at the same time.

• Supports one dual mode input and two dual mode outputs
• Supports resolutions up to 2 x 3840x2160@30Hz 4:4:4 10bit
• Supports audio up to PCM 7.1
• Compliant with DP version 1.2a
• Supports 3D
• 2 Year warranty