• Adapts a SATA connector for use with Micro SATA devices
• Incoporates a 5V DC to 3.3V DC Voltage regulator
• 7 Pin Data + 15 Pin Power (SATA port) to 7 Pin Data + 9 Pin Power (Device) connectors
• Suitable for use with devices requiring 3.3V DC or 5V DC
• 2 Year Warranty

Please Note: Supports Micro SATA drives with power consumption up to 3.3V 0.8A

This simple adapter allows you to connect a hard disk or CD/DVD-ROM drive, equipped with a Micro SATA Data + Power adapter connector, to a computer's SATA port. May also be used with external docking stations.

This new design will operate with devices requiring 5V DC and in addition incoporates a voltage regulator for those devices that require 3.3 Volts.

• Adapts a SATA connector for use with Slim SATA devices
• 7 Pin Data + 15 Pin Power (SATA port) to 7 Pin Data + 6 Pin Power (Device) connectors
• 2 Year Warranty

This simple adapter allows you to connect a hard disk or CD/DVD-ROM drive, equipped with a Slim SATA Data + Power adapter connector, to a computer's SATA port. May also be used with external docking stations.

• For bus-powered USB devices with power consumption requirements of up to 1.4A
• USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
• Can also be used with either USB 1.1 or USB 2.0 peripherals
• 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB Type A Male
• Fully shielded cable with moulded connectors
• Colour: black/additional red USB plug (current only)
• 10 year warranty

This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.

It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Type A Female connector for connecting to your device.

• For bus-powered USB devices with power consumption requirements of up to 1.4A
• USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
• Can also be used with either USB 1.1 or USB 2.0 peripherals
• 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB Type A Male
• Fully shielded cable with moulded connectors
• Colour: black/additional red USB plug (current only)
• 10 year warranty

This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.

It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Type A Female connector for connecting to your device.

• Moulded connector with LINDY design with optimised ergonomics
• Can be tightened by hand very easily, without a screwdriver
• Double-shielded multi-coax cable without signal-weakening ferrite cores
• Cable cross-sections AWG 30, external diameters approx. 6mm
• All contacts connected 1:1, incl. Pin 7
• Colour: black light-grey with red screws
• Available as connection and extension cable: 15-pin HD m/m and m/f
• Lengths from 1m to 5 m

• Moulded connector with LINDY design with optimised ergonomics
• Can be tightened by hand very easily, without a screwdriver
• Double-shielded multi-coax cable without signal-weakening ferrite cores
• Cable cross-sections AWG 30, external diameters approx. 6mm
• All contacts connected 1:1, incl. Pin 7
• Colour: black light-grey with red screws
• Available as connection and extension cable: 15-pin HD m/m and m/f
• Lengths from 1m to 5 m

• Moulded connector with LINDY design with optimised ergonomics
• Can be tightened by hand very easily, without a screwdriver
• Double-shielded multi-coax cable without signal-weakening ferrite cores
• Cable cross-sections AWG 30, external diameters approx. 6mm
• All contacts connected 1:1, incl. Pin 7
• Colour: black light-grey with red screws
• Available as connection and extension cable: 15-pin HD m/m and m/f
• Lengths from 1m to 5 m

Moulded connector with LINDY design with optimised ergonomics

Can be tightened by hand very easily, without a screwdriver

Double-shielded multi-coax cable without signal-weakening ferrite cores

Cable cross-sections AWG 30, external diameters approx. 6mm

All contacts connected 1:1, incl. Pin 7

Colour: black light-grey with red screws

Available as connection and extension cable: 15-pin HD m/m and m/f

Lengths from 1m to 5 m