• 5 metre USB 3.0 Active Extension Repeater Lead
• Supports transfer rates up to 5Gbps
• For even greater distances simply connect up to 5 cables in series
• USB Power Adapter cable included
• 2 year warranty

• 8 metre USB 3.0 Active Extension Repeater Lead
• Supports transfer rates up to 5Gbps
• For even greater distances simply connect up to 5 cables in series
• USB Power Adapter cable included
• 2 year warranty

• 10 metre USB 3.0 Active Extension Repeater Lead
• Supports transfer rates up to 5Gbps
• For even greater distances simply connect up to 5 cables in series
• USB Power Adapter cable included
• 2 year warranty

• 15 metre USB 3.0 Active Extension Repeater Lead
• Supports transfer rates up to 5Gbps
• For even greater distances simply connect 2 cables in series
• USB Power Adapter cable included
• 2 year warranty

• High performance, active cable that provides an extended 5m connection between a computer with USB Type C port and a USB Type C device
• Cascadeable up to a maximum distance of 15m
• Supports the full USB 3.2 / 3.1 Gen 2 bandwidth for speeds of 10Gbps*
• USB Power Adapter cable included
• 2 year warranty

The Lindy USB 3.2 Gen 2 Active Extension Pro is a high-performance active cable that enables access to USB devices over long distances. It supports data transfer rates of up to 10Gbps and is perfect for transferring large amounts of data quickly and reliably.

This 5m USB 3.2 active extension can be cascaded up to a maximum distance of 15m. 

It can be used if a USB device is to be connected at a greater distance, e.g. a permanently installed webcam in a meeting room, a multi-function hub with various interfaces or if repeated access to a device is difficult. The Lindy USB 3.2 Active Extension is compatible with computers with USB 3.2 Type C/Thunderbolt ports, making it the perfect extension tool for newer notebooks, Macbooks and PCs with USB Type C ports.  

The Lindy USB 3.2 Active Extension features a DC socket for connecting a power supply unit for the power supply. A USB power adapter cable is included in the scope of delivery, a USB power supply unit must be purchased separately.

These active extension cables with active, industrial-grade technology and sockets with hook mechanism ensure high and reliable signal quality even in demanding environments. 

*Please note that USB Power Delivery and DisplayPort Alternate Mode (Video) are not supported.

• Supports USB 3.2 Gen 1 (USB 3.0), USB 2.0/1.1 backwards compatibility
• Switching between computers with buttons, TCP/IP with web GUI or RS-232 commands
• Matrix switch with presets function
• Plug & Play, no software required
• 2 year warranty

• Easy to install smart card reader compatible with a variety of computer operating systems
• Supports smart card operations for digital signature, authentication security etc.
• Compatible with corporate ISO 7816 smart card applications
• USB 2.0 High Speed data rates up to 480Mbps
• 2 year warranty

The Lindy USB 2.0 Smart Card Reader makes it easy to manage a variety of smart cards from a Windows or Mac computer with a USB Type A interface. It supports relevant industry standards like ISO 7816 or PC/SC 1.0/2.0 and multiple smart card protocols. Possible applications can include e-banking, e-payment, digital signature, authentication security, e-government etc.

The Lindy USB 2.0 Smart Card Reader is powered by the USB Bus and easy to install and use. Simply install the smart card driver from the Lindy website, then connect the reader to the PC and plug in the smart card.

• Extend two USB 2.0 ports up to 100m using low cost Cat. 6 network cable (not included)
• Bi-directional PoC (Power over Cable) requires a power supply connection from only one side of the installation
• Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed
• Plug & Play installation
• 2 year warranty

This Lindy USB 2.0 Cat.6 Extender can be used to extend the distance between two USB peripheral devices and the host computer by up to 100m. A standard, low cost Cat.5e/6 network cable (not included) is used to bridge the connection between the transmitter and the receiver unit. For best performance and compatibility, we recommend the use of solid core patched cables.

The Extender features bidirectional Power over Cable (PoC) functionality, which provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point-to-point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter or receiver unit. 

With  robust metal housing and integrated mounting brackets this Extender is the ideal solution for industrial environments.

Please note: This product contains one USB 2.0 hub, which needs to be considered if the product is deployed in a larger installation in connection with other devices. 

• Extend 4 USB 3.2 Gen 1 ports up to 100m using Cat.6A network cable (not included)
• Power over Cable requires a single power supply to be connected to the transmitter or receiver only
• Supports USB 3.2 Gen 1 (USB 3.0) up to 5Gbps, USB 2.0/1.1 backwards compatibility, RS232 and FSYNC pass-through ports
• Plug & Play installation
• 2 year warranty

This Lindy USB 3.2 Gen 1 Cat.6A Extender can be used to extend the distance between USB peripheral devices and the host computer by up to 100m. Supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A standard Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft). It's also possible to reach up to 40m using a Cat.6 cable. 

The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The 4 Type A ports on the Receiver can provide 5V power as well to the connected devices; 2 ports support up to 1.5A each and 2 ports support up to 1A each.

Status LEDs help the user to check power, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras.

With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments.

In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.

*: To cover long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or above) cables.

This extender is certified by HDBaseT Alliance.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.

HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.

• Connects a USB Type A or Type C computer to a Gigabit Ethernet network
• Supports 10/100/1000BASE-T, full and half duplex mode
• USB 3.2 / 3.1 Gen 1 / 3.0 SuperSpeed data transfer rates up to 5Gbps
• Bus-powered with no external power supply required
• 2 year warranty

The Lindy USB 3.2 Gen 1 Gigabit Ethernet Converter allows users to conveniently connect a notebook or ultrabook to a Gigabit Ethernet network via a Type A USB or a USB Type C port.

This converter is ideal for ultrabooks or notebooks which do not feature wired network connectivity and for locations which lack wireless connectivity or where it is unreliable or slow. It features a USB Type A as well as a USB Type C plug for connection to the host computer to cover a wide range of devices.

With its small size and lightweight design this USB 3.2 Gigabit Ethernet Converter is easy and convenient to carry, and because it is powered by the USB Bus no power adapter is required.

• Connects to any standard serial device via USB Type A
• Bulit-in COM Port Retention feature allows COM port settings to be stored within the converter
• USB bus-powered with no external power supply required
• Compatible with Windows, Mac and Linux operating systems
• 2 year warranty

• Connects 4 Type C USB peripherals to a Type C Port
• Supports SuperSpeed data rates of up to 10Gbps*
• Handy and stylish design with integrated cable
• Compatible with all USB Type C equipped computers
• 2 year warranty

The Lindy 4 Port USB 3.2 Gen 2 Type C Hub provides 4 USB Type C 10 Gbps SuperSpeed ports for connecting USB Type C peripherals to a USB Type C equipped computer. As part of the USB 3.2 Gen 2 specification, 10Gbps bandwidth provides lightning fast data transfers between host and mass storage devices. This hub is also backwards compatible with USB 3.2 / 3.1 Gen 1 / USB 3.0 and USB 2.0.

The hub is powered by the USB Bus, while it's functional, stylish design with integrated cable makes it the perfect companion for mobile devices. The Type C connectors reversible design was developed to find a connection regardless of which way the cable is inserted into the port and with Plug & Play installation, no drivers are required, therefore this hub can be installed with minimum difficulty, ideal for both professional and first time users.

*Please note that USB Power Delivery and DisplayPort Alternate Mode (Video) are not supported.