You are here: » Homepage
The Lindy 150m Cat.6 HDMI 4K60, USB 2.0 & IR HDBaseT KVM Extender is a complete end to end high performance, reliable solution for extending HDMI signals over long distances via Cat.6 network cable.
The following distance and resolution combinations are possible when using high quality Cat.6 U/UTP or F/UTP cable:
HDBT Mode (USB 2.0 & HID)
100m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit
Long Reach Mode (USB HID only)
120m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit
150m: 1920x1080@60Hz 4:4:4 8bit
Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls.
PoC (Power over Cable) functionality provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point-to-point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter unit. Ideal when power outlets are limited at the receiver end of the installation.
Setting up HDBT mode, this extender supports USB 2.0 devices like mouse, keyboard, and other peripherals to be connected to the receiver to control a source device such as a PC or laptop or for data transfer while in Long Reach mode only USB HID devices are supported. Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side.
In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT_ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
The Lindy Cat.6 DisplayPort 1.2 & USB HDBaseT KVM Extender is an high-end, reliable solution for extending high quality 4K DisplayPort signals over long distances with standard Cat.6 network cable.
This extender also supports lossless audio formats including Dolby TrueHD and DTS-HD to add powerful multi-channel sound to video content, providing an enhanced experience and sense of immersion for the viewer. USB KM connectivity via 2 USB HID ports allow for a keyboard and mouse at the receiver to control a DP equipped PC from a remote PC setup, which can be stored in a secure or controlled temperature environment, while seamlessly providing consistent video content from the source.
Featuring bi-directional IR ports at both sides of the setup, the source equipment can be seamlessly controlled from the display side, and the display can also be controlled from the DisplayPort source device. RS-232 connections also allow for integration into pre-installed control systems. In addition, PoC (Power over Cable) functionality provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point-to-point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter or receiver unit. Ideal for example when power outlets are limited at the receiver end of the installation.
The extenders built-in EDID function ensures maximum compatibility with the display or projector at the receiver, further enhancing this system focus on providing high quality 4K DP content over distances easily and with minimum hassle for the user.
Please Note: keep the units in a cool and dry place. If the extender has to stay in a closed and small area, please ensure that the operating temperature is within the range shown in technical specifications.
KVM Extenders are devices which allow users to work on a computer from a distance by extending the connection between a computer and keyboard, monitor and mouse.
The Fibre Optic HDMI 4K60 KVM Extender is an effective, reliable solution for extending high quality 4K HDMI signals over distances up to 300m with standard LC OM3 fibre cable. Support for HDMI 18G signals allows for the transmission of highly detailed 3840x2160@60Hz resolutions, perfect for detailed content in control rooms, medical setups or security installations.
This extender also supports lossless audio formats including Dolby TrueHD and DTS-HD to add powerful multi-channel sound to video content, providing an enhanced experience and sense of immersion for the viewer. USB KM connectivity via 2 USB HID ports allow for a keyboard and mouse at the receiver to control an HDMI equipped PC from a remote PC setup, which can be stored in a secure or controlled temperature environment, while seamlessly providing consistent video content from the source display. The use of LC fibre between the transmitter and receiver provides a reliable, lower cost connection for much longer distances that what is possible over copper cabling, great for use in electronically _noisy_ environments such as factory shop floors or medical installations.
With the ability to extend signals up to 300m using the two included units, the transmitter can be easily connected to a variety of HDMI source devices such as PCs and laptops in a more convenient location, while the receiver can be placed in a suitable viewing area with a LFD (large format display), monitor or projector, ensuring there is no distraction from the display from bulky source devices. This versatility provides a suitable system for use in various scenarios such as educational presentations, CAD facilities or remote server administration.
Featuring bi-directional IR ports at both sides of the setup, the source equipment can be seamlessly controlled from the display side, and the display can also be controlled from the HDMI source device. RS-232 connections also allow for integration into pre-installed control systems. In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
The extenders built-in EDID function ensures maximum compatibility with the display or projector at the receiver, further enhancing this system focus on providing high quality 4K HDMI content over distances easily and with minimum hassle for the user.
Please note: Lindy_s 10GBase-LR/LW SFP+ LC Single Mode (25039) Fibre Modules can be used as an alternative to the included Mini GBIC multi-mode LC modules, increasing the maximum range of the extender to 1Km (3280.84ft). Maximum supported distance remain up to 300m with HDCP signals.
The Lindy Single display short bracket with Pole and Desk Clamp is a high quality, all in one solution for mounting a single monitor or display to a standard office desk or table. With a robust design and manoeuvrable bracket, the display can be easily tilted, pivoted or rotated to ensure the optimum viewing angle.
This mount will fit most major brands and models of monitor that have a VESA size of 100 x 100 or 75 x75mm. (Compliant to VESA standards - VESA measurements are the recesses on the back of your TV or screen. Please measure these to ensure your TV is compatible with this bracket).
Please note: Please confirm this bracket can support the display's VESA mounting dimensions and weight before ordering
The Lindy Single Display Bracket with pole and desk clamp is a high quality, all in one solution for mounting a single monitor or display to a standard office desk or table. With a robust design and flexible metal arm, the display can be easily manoeuvred to ensure the optimum viewing angle.
This mount will fit most major brands and models of monitor that have a VESA size of 100 x 100 or 75 x75mm. (Compliant to VESA standards - VESA measurements are the recesses on the back of your TV or screen. Please measure these to ensure your TV is compatible with this bracket).
Please note: Please confirm this bracket can support the display's VESA mounting dimensions and weight before ordering
The Lindy Dual Display Bracket with Pole and Desk Clamp is a high quality, all in one solution for mounting dual monitors or displays to a standard office desk or table. With a robust design and manoeuvrable aarm, the displays can be easily tilted, pivoted or rotated to ensure the optimum viewing angle while also positioned suitably for the viewer.
This mount will fit most major brands and models of monitor that have a VESA size of 100 x 100 or 75 x75mm. (Compliant to VESA standards - VESA measurements are the recesses on the back of your TV or screen. Please measure these to ensure your TV is compatible with this bracket).
Please note: Please confirm this bracket can support the display's VESA mounting dimensions and weight before ordering
The Lindy Quad Display Bracket with pole and desk clamp is a high quality, all in one solution for mounting 4 monitor or displays to a standard office desk or table, perfect for premium PC installations, gaming setups, or broadcast studios. With a robust design and flexible metal arm, the display can be easily manoeuvred to ensure the optimum viewing angle.
This mount will fit most major brands and models of monitor that have a VESA size of 100 x 100 or 75 x75mm. (Compliant to VESA standards - VESA measurements are the recesses on the back of your TV or screen. Please measure these to ensure your TV is compatible with this bracket).
Please note: Please confirm this bracket can support the display's VESA mouting dimensions and weight before ordering
Lindy’s range of Low-Cost Wall Mount Brackets is designed to give great value for money without compromising on quality.
This bracket is supplied with all the necessary fixings to attach the bracket to the wall and the screen.
This bracket will fit most major makes, brands and models of TV with a maximum VESA dimension of 50 x 50mm, 75 x 75mm and 100 x 100mm.
Compliant to VESA standards - VESA measurements are the recesses on the back of your TV or screen. Please measure these to ensure your TV is compatible with this bracket.
Note: Please check your TV is under the maximum supported weight before ordering.
The Lindy Single Display Mount Trolley Stand is a professional, durable solution for mounting a single display which is easily transported between locations using heavy-duty casters that can be locked to keep the stand stationary.
With an adjustable VESA mount that can be fixed at a variety of heights, and tilted both forward and back, this stand provides a flexible and comfortable viewing experience for users in boardrooms or classrooms. Rotatable by 90°, displays can be configured to suit standard landscape or portrait layouts for engaging presentations or use at tradeshows. The 360° rotating wheels provide smooth mobility between locations, ensuring simple portable use with no requirement for repeated disassembly.
Supporting LFDs (Large Format Displays) with VESA sizes from 200x200m to 600x400mm, this trolley provides secure mounting of larger LED, OLED and older plasma displays up to 70” in size. The high-quality steel structure ensures heavier displays up to 50kg (110.23lb) are supported. A removable and adjustable shelf is included allowing for placement of keyboards or source devices close to the display. The camera shelf at the top of the unit allows for the positioning of webcams for mobile video conferencing. All cables can be neatly concealed within the trolley stand’s discreet cable management system, perfect for ensuring a tidy mounting solution.
Please note: Please confirm this solution can support the display's VESA mounting dimensions and weight before ordering
The Lindy Single Display Fixed Desk Mount is a simple, sturdy solution for creating innovative collaboration and presentation spaces or decluttering personal workstations. This mount is ideal for displays between 23"" and 43"" and safely supports weights up to 50kg (110.23lb) due to its high-quality steel construction, perfect for use with large format displays.
It's small footprint and 60° left to right rotation allows for flexible for installation while increasing available desk space. This feature also allows users to adjust the screen position providing a comfortable viewing angle, ideal multiple users are viewing the same display.
The integrated cable management system allows for a tidy, clutter free installation, meeting the requirements of modern homes and offices by adding aesthetic value to home cinema configurations and productive group spaces. The mount is simply bolted down to a surface and includes a neat cover hiding the mounting hardware.
Please note: Please confirm this bracket can support the display's VESA mounting dimensions and weight before ordering
The Lindy Single Display Full Motion Wall Mount is a high quality, secure solution for mounting a single display to a brick or stud wall, with ability to freely tilt or horizontally move the display. The mounts low-profile, slim design provides a flush fit of the display to the surface, ensuring an aesthetically pleasing setup in residential or professional AV installations, while the cantilever arm allows for simple access to the rear panel connections. The display is easily adjusted horizontally, or with a 15° tilt , to provide the most comfortable viewing experience.
Supporting LFDs (Large Format Displays) with VESA sizes from 200x200m to 400x400mm, this bracket provides secure mounting of larger LED, OLED and older plasma displays up to 70”. The heavy-duty steel structure ensures heavier displays up to 45kg (99lb) are supported.
The mount includes plastic covers to provide a more appealing design, covering the wall plate panel and cable management covers, great for scenarios where design is of utmost importance, including residential and retail installations.
Please note: Please confirm this solution can support the display's VESA mounting dimensions and weight before ordering
The Lindy DisplayPort to HDMI Converter is ideal for connecting a DisplayPort equipped source such as a PC or laptop to an HDMI monitor or HDTV. It supports high definition video resolutions up to 1920x1080@60Hz and allows Audio pass-through if supported by the video source.
This converter can also be used to add a secondary monitor for extended or mirrored desktop modes to increase productivity and screen real estate. Internal copper shielding provides enhanced reliability and compatibility. The converter is also ideally suited for travelling due to its compact, lightweight form factor and convenient plug & play installation.
 |
 |