You are here: » Homepage
The LINDY Multi AV Faceplate is a ready to use single gang wall plate with 10cm trailing leads. This solution provides a neat and tidy AV installation with no soldering required just connect the cables and feed them through the walls.
Fitted socket DE with cover frame for housing the AV extender modules and snap-in connection modules based on the German system
Fitted socket DE with cover frame for housing a keystone module based on the German system.
Fitted socket DE with cover frame for housing two keystone modules based on the German system .
This Video Over IP controller enable a fast and reliable control system for 4K Over IP Extender installations. This unit provides a single interface to manage large installations including video walls with the option to create groups to simplify the control tasks. It's also possible to connect an HDMI monitor (max resolution 1080p) directly to this processor. A USB mouse can also be connected to the processor to control the interface without using a PC. Device management is controlled by a web based visual interface with signal preview making setup of the installation fast and intuitive. The convenient POE gigabit interface allows users to install the unit without connecting the included PSU.
Please note: this unit works only when connected to a Gigabit network where several extender transmitter units (No.38266) and receiver units (No.38267) are connected.
The Lindy VGA to DVI-D Converter is a compact, premium solution for connecting a DVI monitor or display to legacy VGA source devices. Supporting resolutions up to 1920x1200, this converter is perfect for use in offices at home, in the workplace or in education, or for connecting analogue PC systems to eye-catching digital signage displays.
A separate USB Type A connection provides power for even the most demanding scenarios.
The Lindy VGA to DisplayPort Converter is a compact, premium solution for connecting a DisplayPort monitor or display to legacy VGA source devices. Supporting resolutions up to Full HD, this sleek converter is perfect for use in offices at home, in the workplace or in education, or for connecting analogue PC systems to eye-catching digital signage displays.
An additional 3.5mm VGA audio connection also allows for audio to be embedded into DisplayPort to provide 2CH stereo to compliment a professional video experience, while a separate USB Type A connection ensures there is always enough power for even the most demanding scenarios.
The LINDY Modular AV Faceplate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Install this VGA Snap-in Block into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Additional required products...
Please Note: The LINDY Modular AV Faceplate System must be used in conjunction with LINDY Faceplates. Single Gang Faceplate or Double Gang Faceplate are also available.
The Lindy VGA EDID Emulator is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM extenders, switches and splitters. It can also be used in place of a monitor to keep the graphics card of a PC or server awake for remote access via IP. With support for resolutions up to 1920x1200@60Hz, the emulator is suitable for use with legacy PCs and displays. When used with the Lindy EDID recorder (32120) this device can provide cloned EDID information to the graphics card.
It is also possible to use the Emulator without cloning a display as it comes complete with pre-set EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.
The Lindy VGA & Audio to HDMI Converter combines analogue video and stereo audio signals and converts them into a HDMI signal, perfect for using legacy PC and AV equipment with HDMI displays. It supports resolutions up to 1920x1080. The integrated USB cable can be connected to a USB port or USB power supply to power the converter.
The converter is also ideally suited for travelling due to its compact, lightweight form factor and convenient Plug & Play installation.
Please Note: This product is a format converter, from analogue to digital, there is no resolution scaling.
The VGA & Audio to HDMI Converter is capable of combining analogue video and stereo audio signals and converting them into a HDMI signal, perfect for using legacy PC and AV equipment seamlessly with the latest LCD, LED and Plasma displays.
The VGA and Audio converter features simple plug and play installation, there is no configuration required as there is no scaling of the video signal, with the output resolution matching the input resolution.
Converter tethers are compact, secure solutions for equipping the correct converter to a secure display cable, providing simple connectivity for different users and source devices.
The Lindy USB Type C, mDP & DisplayPort to HDMI 18G Converter Tether is a superior, multi-av solution with separate USB Type C, Mini DP and DisplayPort to HDMI converters, all fitted securely to a 15cm diameter stainless-steel tether for easy access when required. With a built-in clamp which fits around the display’s HDMI cable*, this tether is perfect for presentation or collaborative environments where different users will have a variety of source devices and connections. This ensures the adapters are also fixed in place ready for the next user.
With active chipset conversion each converter provides enhanced compatibility with many different source connections and graphics cards including PCs, notebooks and tablets. Supporting resolutions up to 3840x2160@60Hz 4:4:4 8bit, each converter ensures a premium viewing experience, perfect for immersive learning experiences in classrooms, engaging conference room displays or field-based demonstrations and training.
*The HDMI cable clamp will fit cables up to approx. 8mm (0.31in) diameter
 |