• Compact External Metal Enclosure with integrated power supply
• For 4x 3.5” SATA HDDs with security locks
• SAS / SATA Multilane SFF-8470 interface supports transfer rates up to 12Gbps (4 x 3 Gbps)
• Supports four SATA II HDDs up to 2TB each
• Supports all RAID levels for 4 HDDs depending on host controller
• Built-in USB printer server, UPnP Server
• Built-in low-noise 8cm ventilation Fan
• IEC power input and ON/OFF switch
• Compatible with all modern OS
• 2 year warranty

The LINDY Multilane Quad Drive RAID System features a high speed SAS interface (SFF-8470) allowing you to transfer data at up to 12 Gigabits per second (4 x 3 Gigabits) and can hold up 8 Terabytes of storage (4 x 2TB) using SATA Hard Drives (not supplied) making it the perfect storage addition to any computer or server.

The Enclosure can be connected to any compatible computer using standard SAS or SATA Multilane cables. If your computer does not feature a compatible port you can simply add a SATA Multilane PCI card to add this functionality. When connected to a SATA or SAS controller with RAID functionality the LINDY Multilane Quad Drive RAID System will provide compatibility with all RAID levels supported by the controller.

For indoor use only

Power Consuption: 100-240VAC, 50/60Hz Output 12V/6A 5V/5A

Operating conditions: 0~45°C, 20~80% hum

Weight approx.: 2.7kg

Dimensions WxDxH: 13.5x27x18.5cm

Package contents:

Multilane Quad Drive RAID System

Screw driver + 20 screws for 2.5" HDDs

Mains cable, ~1.4m

LINDY Manual

• 5 metre USB 2.0 Active Extension Repeater cable
• Plug & Play - no special software installation required
• Connectors: Type A USB Male to Panel Mount Type A USB Female
• For even greater distances simply connect up to 5 cables in series
• Compatible with USB 2.0 and USB 1.1 equipped PCs and Macs
• 2 year warranty

Also available is our USB Active Extension System which can support distances of up to 56m.

The LINDY Panel Mount USB Extension Cable uses built-in active electronics to extend the cable length of a USB 2.0 device by an additional 5m. It can be used as part of a daisy chain with other active 5m extension cables to achieve a total distance of 25m.

The cable's unique, panel mount  design allows the active electronics to fitted into a standard USB connector - an advantage over other active USB leads which use special, bulky connectors. 

• Create your own external hard drive
• Portable design - take it anywhere you want and access the data from any USB enabled computer
• Super-lightweight, compact aluminium housing
• Connect to a USB 2.0 port and access data at almost the same speed as internal hard drives
• For modern 2.5" SATA hard drives

• Internal card reader supports the following media: Features USB 2.0 port and eSATA ports for connecting external devices
• Powered via USB bus - no internal power connection required
• Fits into a 3.5" expansion bay
• Internal connection cables and fixing screws included
• Compatible with Windows ME/2000/XP/Vista/7 and Mac OS X or higher

• For use with 3.5" SATA 1.0a and SATA 2.0 hard drives
• Connects to a USB 2.0 port (480Mbps) or FireWire (400 Mbps) port
• Lightweight, compact aluminium design for excellent heat dissipation
• Fanless, noise free operation
• Advanced Format 3TB support

• USB 2.0 to Gigabit Ethernet Adapter (also known as a USB to Cat5 / USB to RJ-45 adapter)
• High Speed USB 2.0 with speeds of up to 480Mbps
• Converts a USB 2.0 port into an auto-sensing 10Base-T, 100Base-TX Fast Ethernet or 1000Base-T Gigabit Ethernet port
• Plug & Play installation
• Backwards compatible with USB 1.1 and 1.0 host controllers
• Both full and half duplex modes supported
• Bus-powered from the USB port
• Activity LED
• Compatible with Windows ME/2000/XP/Vista/7/8, Mac OS X
• 2 year warranty

• USB 2.0, also compatible with USB 1.1
• Meets SATA Specification 1.0a (1.5 Gb/s), supports SATA drives of all speed classes
• Supports Raid 1, provides added data security against drive failures and defects
• Connectors on the adapter: eSATA connectors, to connect eSATA drive enclosures; or directly connect SATA drives with the included eSATA/SATA connector cables,

• USB 2.0 up to 480Mbps, compatible with USB 1.1
• Interfaces: 5x USB 2.0, 1x eSATA and 1x SATA
• USB bus powered, peak current 0.5A
• Can be used with an external power supply when used with higher power consumption peripherals
• Supports hot plug and play
• Supports up to 127 USB devices
• Status LED for each port
• Compatible with Windows ME/2000/XP/Vista/7 and Mac OS 9.X or above
• Warranty: 2 years

• Connect USB enabled servers, desktop or notebook computers to PS/2 KVM switches
• Emulates the presence of a USB keyboard and mouse - no delay when switching channels
• Can emulate particular keyboard styles - extra keys are reported to host computer
• Allows PS/2 keyboard hotkey commands to emulate additional Mac and SUN keyboard commands
• 2m moulded cable with miniature conversion circuit neatly moulded into the centre
• 3-in-1 KVM combined cable for minimum clutter
• Heavily shielded coaxial RGB video cable
• DDC support for "Plug & Play" monitors
• Flash upgradeable for future enhancements
• Low power consumption
• USB Type A Male & 15 Way HD Male to 2 x 6 Pin Mini DIN Male & 15 Way HD Male, 2m