You are here: » Homepage
Multilane, 4 external Serial-ATA-II connections for your PC! Supports data rates of up to 3 Gbit/sec., RAID5, JBOD, Port Multiplier and NCQ.
This PCI-X (64 Bit PCI) host adapter can be used to expand a PC with four external SATA II interfaces via the Multilane connection. This card supports a 64bit, 133 MHz Interface on the host side and four autonomous SATA-II ports on the device side. The external connection is a multilane connection. The multiline connection can be used to send to up to four SATA II interfaces. Data is sent to the external connection with a multilane cable (Order No. 33225).
The LINDY M.2 SSD to PCIe Adapter Card allows high performance PCIe based SSDs to be installed in a typical PCIe x4 slot commonly found on desktop PCs and servers. Using NVMe technology that was built specifically for SSDs allows super fast connection speeds. Supporting dual sided SSD modules with 1.5mm component height and a wide range of lengths allows most modules to be installed with ease.
Please note: SATA Based SSD Modules are not compatible with this adapter card. To boot from NVMe SSDs you will need appropriate BIOS support.
Contents:
M.2 PCIe SSD to PCIe Adapter Card
Standard bracket
Manual
Stand-off Screw
Four internal SATA-II connections for your PC! Supports data transfer rates of up to 3 GBit/sec., NCQ and Port Multiplier!
This PCI (32 Bit PCI) host adapter can be used to expand a PC with four external SATA II interfaces. This card supports a 32bit, 66 MHz Interface on the host side and four independent SATA-II ports on the device side.