• Installation ready Multi AV faceplate with 10cm trailing leads
• Single gang, plastic wall plate design – fits a standard mains back box
• Connectors: HDMI, VGA, USB, Audio
• Faceplate size: 86mm x 86mm
• 2 year warranty

The LINDY Multi AV Faceplate is a ready to use single gang wall plate with 10cm trailing leads. This solution provides a neat and tidy AV installation with no soldering required just connect the cables and feed them through the walls.

• For housing a snap-in module 25mmx50mm
• Plastic panel white, approx. 81mm x 81mm, with screw fixing and extendible clips
• Suitable for the German standard; the distance between the attachment positions of both screws is approx. 60mm
• Also suitable for surface-mount frame 81mm x 81mm x 45mm, Art.-No. 60546
• Colour: white

Fitted socket DE with cover frame for housing the AV extender modules and snap-in connection modules based on the German system

• For housing a keystone module
• Plastic panel white, approx. 81mm x 81mm, with screw fixing and extendible clips
• Suitable for the German standard; the distance between the attachment positions of both screws is approx. 60mm
• Also suitable for surface-mount frame 81mm x 81mm x 45mm, Art.-No. 60546
• Colour: white

Fitted socket DE with cover frame for housing a keystone module based on the German system.

• For housing two keystone modules
• Plastic panel white, approx. 81mm x 81mm, with screw fixing and extendible clips
• Suitable for the German standard; the distance between the attachment positions of both screws is approx. 60mm
• Also suitable for surface-mount frame 81mm x 81mm x 45mm, Art.-No. 60546
• Colour: white

Fitted socket DE with cover frame for housing two keystone modules based on the German system .

• USB A to A Female connectors
• Supports USB 1.1 and USB 2.0 devices
• Allows USB cables to be connected to a face plate
• USB Type A Female connections front and rear
• Suitable for use with our range of snap in blocks and wall plates
• Dimensions: 15mm x 20mm
• 2 year warranty

The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.

These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.

• Surface mount back box for (Front Plate) 4 Snap-in module LINDY No. 60542
• External dimensions: 146mm x 86mm x 47mm
• Plastic, white, RoHS and UL compliant
• Fixing screws for the cover: approx 120.5mm

• Surface mount back box for (Front Plate) 2 Snap-in module LINDY No. 60541
• External dimensions: 86mm x 86mm x 47mm
• Plastic, white, RoHS and UL compliant
• Fixing screws for the cover: approx 60mm

• 3.5mm Stereo keystone female to female connector
• Supplied in a pack of 2
• Suitable for use with our range of snap in bezels and wall plates
• Dimensions: 15mm x 20mm
• 2 year warranty

• Single Snap-in block
• Supplied in a pack of 4
• Suitable for use with our range of Snap-in Blocks and face plates
• For use with all standard sized keystones (15mm x 20mm)
• 2 year warranty

The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.

The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

A Dual Snap-in Block is also available.

Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.

• Supplied with fixing screws and labels
• May be surface or flush mounted
• Can accommodate 2 modules from our Modular AV Extender Wall Plate System or AV Face Plate System
• A blanking plate can be used if only a single module is installed
• Requires a back box with a minimum depth of 44mm or greater
• Dimensions: 86 x 86mm
• Colour: White
• 2 year warranty

Use in conjunction with a Single Surface Pattress Box.

This single gang face plate is designed to be used with the LINDY Modular AV Extender Wall Plate System or AV Face Plate System which are designed to extend a combination of audio and video signals over low cost Cat5e/6 cable.

Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations.

2 modules can be installed in this face plate. If installing a single module, a blanking plate can be used for a tidier installation.

Also available are a range of accessories including face plates, back boxes and bulk cable for a total extender solution.