• Affordable, high quality DVI cable with gold plated connectors
• Supports dual link resolutions up to 2560 x 1600 @ 60Hz
• Pure digital connection from your source to display
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

The LINDY DVI-D Dual Link Cable is ideal for use as an LCD monitor cable or DVI projector cable. Just one of our huge range of DVI cables and DVI leads which also includes DVI-I cables with analogue support. For connecting DVI devices at distances of over 10m use our Super Long Distance DVI Cables.

Package Contents:

5m Dual Link DVI-D Cable, Black

• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• DVI-D Dual Link Extension Cable
• For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

Important!

Please note that cable lengths over 7.5m are above the recommended length laid down by the DDWG organisation who developed the specification. This factor also depends on the hardware combination of graphics card and monitor as to how far this distance can be exceeded.

• DVI-D Dual Link Extension Cable
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
• Increased insulation resistance up to 25%
• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
• Tight fit of internal wires as there is no inner mould
• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
• Smaller overall dimensions which allows more room behind the host or peripheral
• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Fibre optic design overcomes the distance limitations of sending digital DVI signals over copper wires
• Built-in connector design allows direct connection to source and display
• Extends digital display signals with absolutely no degradation
• Ideal for home cinema, medical, factory automation, public display installations etc.
• Available in lengths up to 150m
• 2 year warranty

Our Fibre Optic Hybrid DVI-D cables are the perfect solution for easily extending DVI digital signals over incredible distances.

Fibre-optic technology allows transmission distances that far exceed the maximum supported by standard copper only cables.

These cables feature H-PCF (Hard-Polymer Clad Fibre) glass fibres for sending digital display signals.

The Transmitter and Receiver modules are each equipped with standard DVI-D Male connectors for connecting to the source (e.g. DVI graphics card) and the display.

The modules are connected together by a fibre and copper solution. 

Note: This product will work with most graphic cards & displays on the market but certain models do not output power through the DVI port.

For source devices and displays that don't output power through their DVI port, please use the Multi Country PSU's included.

Package contents:

DVI-D Hybrid Fibre Cable

2 x Multi Country PSU - 5V, 1.2A

LINDY Manual

• Fibre optic design overcomes the distance limitations of sending digital DVI signals over copper wires
• Built-in connector design allows direct connection to source and display
• Extends digital display signals with absolutely no degradation
• Ideal for home cinema, medical, factory automation, public display installations etc.
• Available in lengths up to 150m
• 2 year warranty

Our Fibre Optic Hybrid DVI-D cables are the perfect solution for easily extending DVI digital signals over incredible distances.

Fibre-optic technology allows transmission distances that far exceed the maximum supported by standard copper only cables.

These cables feature H-PCF (Hard-Polymer Clad Fibre) glass fibres for sending digital display signals.

The Transmitter and Receiver modules are each equipped with standard DVI-D Male connectors for connecting to the source (e.g. DVI graphics card) and the display.

The modules are connected together by a fibre and copper solution. 

Note: This product will work with most graphic cards & displays on the market but certain models do not output power through the DVI port.

For source devices and displays that don't output power through their DVI port, please use the Multi Country PSU's included.

Package contents:

DVI-D Hybrid Fibre Cable

2 x Multi Country PSU - 5V, 1.2A

LINDY Manual

• Fibre optic design overcomes the distance limitations of sending digital DVI signals over copper wires
• Built-in connector design allows direct connection to source and display
• Extends digital display signals with absolutely no degradation
• Ideal for home cinema, medical, factory automation, public display installations etc.
• Available in lengths up to 150m
• 2 year warranty

Our Fibre Optic Hybrid DVI-D cables are the perfect solution for easily extending DVI digital signals over incredible distances.

Fibre-optic technology allows transmission distances that far exceed the maximum supported by standard copper only cables.

These cables feature H-PCF (Hard-Polymer Clad Fibre) glass fibres for sending digital display signals.

The Transmitter and Receiver modules are each equipped with standard DVI-D Male connectors for connecting to the source (e.g. DVI graphics card) and the display.

The modules are connected together by a fibre and copper solution. 

Note: This product will work with most graphic cards & displays on the market but certain models do not output power through the DVI port.

For source devices and displays that don't output power through their DVI port, please use the Multi Country PSU's included.

Package contents:

DVI-D Hybrid Fibre Cable

2 x Multi Country PSU - 5V, 1.2A

LINDY Manual