You are here: » Homepage
The Lindy Fibre Optic AV Dongle Extender range provides a flexible, professional solution for extending HDMI®, DisplayPort and USB-C AV signals over distances of up to 10km using a single simplex LC OS2 single-mode fibre optic cable, or up to 300m using an OM4 multimode fibre optic cable.
Transmitters and receivers from across the range can be mixed and matched in any combination, allowing installers to select the required interface independently at the source and display. This provides a straightforward way to connect equipment with different AV interfaces without separate converters and allows an endpoint to be changed without replacing the installed fibre infrastructure.
The extender supports all the standard VESA resolutions up to 3840x2160@60Hz 4:4:4 8bit, providing detailed Ultra HD video for professional displays, projectors and digital signage systems. HDR, HLG and Dolby Vision support provide enhanced contrast and a wider colour gamut, while HDCP compatibility supports the transmission of protected 4K content.
Support for lossless audio formats including Dolby Atmos and Dolby TrueHD allows high-quality multichannel audio to be transmitted alongside the video signal, making the range suitable for professional presentation, signage and audio-visual installations.
A single simplex LC fibre optic cable carries high-bandwidth AV signals over distances far beyond those achievable with conventional copper-based extension systems. The fibre link is immune to electromagnetic and radio-frequency interference, helping to provide stable signal transmission in electrically noisy environments such as medical facilities, manufacturing sites, control rooms and other demanding professional installations. Its small connector and cable dimensions also make fibre easy to route through conduits, under floors and within wall partitions.
The compact aluminium enclosure supports effective heat dissipation, while the integrated 25cm pigtail cable allows the transmitter to be positioned discreetly without obstructing adjacent ports. The unit can draw power from compatible source equipment, while the USB-C power port accepts an additional 5V supply where auxiliary power is required.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Lindy Fibre Optic AV Dongle Extender range provides a flexible, professional solution for extending HDMI®, DisplayPort and USB-C AV signals over distances of up to 10km using a single simplex LC OS2 single-mode fibre optic cable, or up to 300m using an OM4 multimode fibre optic cable.
Transmitters and receivers from across the range can be mixed and matched in any combination, allowing installers to select the required interface independently at the source and display. This provides a straightforward way to connect equipment with different AV interfaces without separate converters and allows an endpoint to be changed without replacing the installed fibre infrastructure.
The extender supports all the standard VESA resolutions up to 3840x2160@60Hz 4:4:4 8bit, providing detailed Ultra HD video for professional displays, projectors and digital signage systems. HDR, HLG and Dolby Vision support provide enhanced contrast and a wider colour gamut, while HDCP compatibility supports the transmission of protected 4K content.
Support for lossless audio formats including Dolby Atmos and Dolby TrueHD allows high-quality multichannel audio to be transmitted alongside the video signal, making the range suitable for professional presentation, signage and audio-visual installations.
A single simplex LC fibre optic cable carries high-bandwidth AV signals over distances far beyond those achievable with conventional copper-based extension systems. The fibre link is immune to electromagnetic and radio-frequency interference, helping to provide stable signal transmission in electrically noisy environments such as medical facilities, manufacturing sites, control rooms and other demanding professional installations. Its small connector and cable dimensions also make fibre easy to route through conduits, under floors and within wall partitions.
The compact aluminium enclosure supports effective heat dissipation, while the integrated 25cm pigtail cable allows the transmitter to be positioned discreetly without obstructing adjacent ports. The unit can draw power from compatible source equipment, while the USB-C power port accepts an additional 5V supply where auxiliary power is required.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Lindy Cat.6 DVI-D Single Link, USB, Audio & RS-232 KVM Extender allows users to control a source device such as a PC from a single keyboard, mouse and display up to 140m using a Cat.6 RJ-45 cable. Supports single link resolutions up to 1920x1200 and HDMI signals including Full HD 1080p, 3D and HDCP 1.4. Ideal for KVM applications, the Extender consists of a transmitter and a receiver unit. The transmitter must be connected to a source such as a PC or KVM Switch, while the console with display, keyboard and mouse must be connected to the receiver. It's also possible to connect additional USB 2.0 devices such as storage and hard drives (webcams are not supported).
The extenders built-in EDID function ensures maximum compatibility with the display or projector at the receiver or even at the loop out DVI port on the transmitter, while analogue audio 3.5mm inputs and outputs allow users to connect speakers, microphones and a line-in interface.
RS-232 connections also allow for integration into pre-installed control systems.
This extender provides a simple plug & play installation, with no additional drivers required, great for both professional and first time users. In addition to point-to-point applications, it can be used also via a gigabit network, a rotary switch on both units can pair transmitters with receivers.
Please note: to reach distances longer that 140m, it is possible to add a gigabit network switch or the repeater 42709 inbetween transmitter and receiver (with 42709 the total length supported is up to 280m).
The Lindy Cat.6 HDMI 8K60, Audio, IR & RS-232 HDBaseT KVM Extender is a high-performance and reliable solution for extending AV and data signals over long distances using a single Cat.6 network cable.
Supporting video transmission up to 48Gbps FRL and 18Gbps TMDS with DSC compression, the extender delivers resolutions up to 8K* with exceptional image quality. Support for HDR (High Dynamic Range), including HDR10, HDR10+, and HLG, ensures enhanced brightness, deeper contrast, and a wider colour gamut for a more immersive viewing experience. Advanced HDMI 2.1 features such as Dolby Vision, Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM), Quick Media Switching (QMS), Quick Frame Transport (QFT), and Source-Based Tone Mapping (SBTM) are also supported.
The extender enables the connection of HDMI® and USB 2.0 devices, allowing users to control source equipment such as PCs or laptops while transmitting AV and data signals over long distances. This makes it ideal for KVM installations, control rooms, collaboration spaces, and meeting room environments. Additional API commands provide advanced functionality, including HDCP and EDID management, video keep-alive, and test pattern generation for installation and troubleshooting.
PoC (Power over Cable) technology adds installation flexibility by delivering power and data through the same Cat.6 cable between the transmitter and receiver. This eliminates the need for a second power supply, as only one unit requires external power.
The receiver features 3.5mm analogue audio outputs with audio de-embedding, allowing direct connection to speakers or amplifiers. The transmitter includes an EDID DIP switch with preset and copy functions for simplified configuration.
Bi-directional IR ports on both the transmitter and receiver allow convenient remote control of source devices from the display location, while also enabling display control from the source side of the installation.
HDBaseT is a globally recognised standard for the reliable distribution of high-quality AV, control, USB and power signals over long distances using cost-effective Cat.6 or higher cabling.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please note: The stated transmission distances and resolutions are achievable with a direct point-to-point connection between the transmitter and receiver using high-quality Cat.6 or higher cable. The use of different cable types, couplers, patch panels, or intermediate connections may reduce the maximum supported distance and performance.
*Please refer to the user manual for a complete list of supported resolutions.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress, and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
This Lindy USB 3.2 Gen 1 & HDMI® 4K60 HDBaseT Extender can be used to extend the distance between 2 host computers and a console with 2 HDMI® displays and USB peripheral devices by up to 100m. Supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft).
The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The Transmitter has 2 Type C switchable host ports, one of them supports Power Delivery up to 100W connecting an additional USB power supply from a dedicated Type C power port. Both units have local device ports, 1 Type A and 2 Type A each unit, while the Receiver features 2 HDMI® ports supporting Ultra HD resolutions up to 4K60.
Status LEDs help the user to check power, active host, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras. Switching between the 2 hosts can be done via front panel button on the Transmitter or can be set as automatic, it's also possible to control the extender via API commands.
With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments.
The power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
*: To get the best performances we recommend using HDBaseT-certified Cat.6A (or above) cables.
Please Note: switching between the 2 hosts can take a few seconds, please download the latest DisplayLink drivers.
This extender is certified by HDBaseT Alliance.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Lindy 100m Cat.6 Dual Head HDMI®, USB & RS-232 KVM Extender is a powerful, versatile solution for extending and controlling a dual head workstation up to distances of 100m (328.08ft) over a single Cat.6 cable using HDBaseT. It's utilisation of the HDBaseT 2.0 specification allows for the transmission of audio, video & various control methods with just one connection between the transmitter and receiver units.
The use of two HDMI® displays at resolutions up to 1920x1080@60Hz and USB HID's in a convenient remote location creates a super effective productivity console. This gives users the ability to fully operate a high performance PC which is stored in a convenient location, helping to meet the requirements of modern offices as multiple applications can be open and sharing data simultaneously.
Up to 7.1 Digital & Stereo analogue can be passed through from the source to standalone amplifiers, speakers and headphones to ensure any relevant audible information or data is understood by the user.
Serial & Bi-directional IR add to this extender's comprehensive suite of control methods. Source and display devices can be controlled at either point of a configuration using an IR remote control, whilst serial input and control devices can be used at the remote console.
In applications which rely heavily on the uptime of source devices such as medical environments or manufacturing, the Lindy 100m Cat.6 Dual Head KVM extender can be used to ensure PCs or servers can be locked in a secure location to prevent any unauthorised access or tampering of equipment and protect them from major power outages, fires or water leaks. It_s reliable HDBaseT connection means users can be confident that control will always be maintained over the source device even in the most demanding environments.
KVM Extenders are devices which allow users to work on a computer from a distance by extending the connection between a computer and keyboard, monitor and mouse.
The Fibre Optic DisplayPort 1.2 KVM Extender is an effective, reliable solution for extending high quality 4K DisplayPort signals over distances up to 300m with standard LC fibre cable. Support for DisplayPort 1.2 allows for the transmission of highly detailed 3840x2160@60Hz resolutions, perfect for eye catching digital signage or detailed content in medical setups.
This extender also supports lossless audio formats including Dolby TrueHD and DTS-HD to add powerful multi-channel sound to video content, providing an enhanced experience and sense of immersion for the viewer. USB KM connectivity via 3 USB HID ports allow for a keyboard and mouse at the receiver to control a DP equipped PC from a remote PC setup, which can be stored in a secure or controlled temperature environment, while seamlessly providing consistent video content from the display. The use of LC fibre between the transmitter and receiver provides a reliable, lower cost connection for much longer distances that what is possible over copper cabling, great for use in electronically _noisy_ environments such as factory shop floors or medical installations.
With the ability to extend signals up to 300m using the two included units, the transmitter can be easily connected to a variety of DisplayPort source devices such as PCs and laptops in a more convenient location, while the receiver can be placed in a suitable viewing area with a LFD (large format display), monitor or projector, ensuring there is no distraction from the display from bulky source devices. This versatility provides a suitable system for use in various scenarios such as educational presentations, CAD facilities or remote server administration.
The extenders built-in EDID function ensures maximum compatibility with the display or projector at the receiver, further enhancing this system focus on providing high quality 4K DP content over distances easily and with minimum hassle for the user.
Please note: Lindy_s 10GBase-LR/LW SFP+ LC Single Mode (25039) Fibre Modules can be used as an alternative to the Included Mini GBIC multi-mode LC modules, increasing the maximum range of the extender to 500m (1640.4ft).
This Lindy USB 3.2 Gen 1 Cat.6A Extender can be used to extend the distance between USB peripheral devices and the host computer by up to 100m. Supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A standard Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft). It's also possible to reach up to 40m using a Cat.6 cable.
The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The 4 Type A ports on the Receiver can provide 5V power as well to the connected devices; 2 ports support up to 1.5A each and 2 ports support up to 1A each.
Status LEDs help the user to check power, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras.
With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments.
In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
*: To cover long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or above) cables.
This extender is certified by HDBaseT Alliance.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
This Lindy USB 3.2 Gen 1 HDBaseT Extender can be used to extend the distance between USB peripheral devices and 2 host computers by up to 100m. Supports multiple USB signals, control, bulk, interrupt and isochronous data transfer.
A standard Cat.6A or above network cable* (not included) is used to bridge the connection between the transmitter and the receiver unit at the maximum supported distance of 100m (328.08ft). It's also possible to reach up to 40m using a Cat.6 cable.
The Extender features Power over Cable, which requires a single power supply only to be connected either to the transmitter unit or to the receiver unit. The Transmitter has 2 switchable host ports, one Type C and one Type B, with additional local device ports; 4 ports on the Receiver can provide 5V power as well to the connected devices: 2 Type A ports support up to 1.5A each, 1 Type A and 1 Type C ports support up to 1A each.
Status LEDs help the user to check power, link between Transmitter and Receiver and if data transfer is running while additional RS232 and FSYNC GPIO pass-though ports allow sending bi-directional commands also for industrial cameras. It's also possible to control the extender via API commands.
With robust metal housing and mounting brackets, this Extender is the ideal solution for professional applications and industrial environments.
In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
*: To cover long distances close to the 100m limit, we recommend using HDBaseT-certified Cat.6A (or above) cables.
This extender is certified by HDBaseT Alliance.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT Trade Mark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
 |
