You are here: » Homepage
The Lindy DVI to VGA converter converts signals from a DVI-D equipped source into a VGA signal. It supports resolutions up to 1080p and 1920x1200 for VGA displays. This allows the connection of DVI capable devices, such as PC_s, notebooks and ultrabooks, to an older VGA display or projector.
This converter can also be used to add a secondary monitor for extended or mirrored desktop modes to increase productivity and screen real estate. With its lightweight, low profile design and plug & play installation this converter is perfect for use while travelling.
The Lindy HDMI® to VGA Converter seamlessly transforms signals from an HDMI®-equipped source into a high-quality VGA output, supporting impressive resolutions up to 1920x1200@60Hz. This enables effortless connectivity between modern HDMI® devices_such as PCs, notebooks, and ultrabooks_and older VGA displays or projectors, bridging the gap between contemporary technology and legacy equipment.
Designed with versatility in mind, this converter not only facilitates the use of older displays but also allows for the addition of a secondary monitor, expanding your available desktop workspace for enhanced productivity. Its compact, lightweight design and straightforward plug-and-play installation make it an ideal travel companion, ensuring you are always ready to connect and present, no matter where you are.
Experience seamless integration and enhanced functionality with the Lindy HDMI® to VGA Converter, the perfect solution for maximizing your display options.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Lindy HDMI® to VGA and Audio Converter is ideal for connecting HDMI® equipped sources such as laptops, ultrabooks and PCs to VGA displays.
It converts the HDMI® signal (along with the associated digital audio stream) into an analogue VGA signal and supports resolutions up to 1920x1080. This converter is the perfect tool for flexible working in different environments, whether it's in the office, traveling to hold presentations or at home, as it also permits the use of older VGA monitors or projectors to display content.
The Lindy 8x8 HDMI® 18G Matrix with Video Wall Scaling is the professional solution for distributing content from several source devices to many HDMI® displays, or for creating eye-catching video wall setups.
Supporting resolutions up to 4K@60Hz, content can be shown in excellent clarity, great for ensuring a high-quality video experience in sports bars, retail stores or multiple consecutive locations in larger installations. Resolutions can easily be scaled and controlled by the user to ensure the optimum, or consistent, resolution is always displayed.
As well as providing a professional 8x8 matrix switching function, this device can create customisable singular or dual video wall displays in a variety of layouts. This provides the user with a range of flexible display options for their installation and allows the device to be used in a range of specialised environments; including transport hubs, points of sale and hospitality. Analogue audio ports also allow for 2-channel audio extraction, to add immersive stereo audio to the content on screen.
The matrix also provides instant seamless switching between source devices and displays, a crucial feature for use in real time operation centre scenarios such as traffic monitoring, stock market floors or security setups. Controlled via independent IR as well as LAN and push button switching, this matrix ensures minimum effort is required of the user when creating their installation, while RS-232 control also allows for integration into larger control systems.
Professional EDID management ensures maximum compatibility with both the source devices and displays.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Lindy HDBaseT Presentation System is a powerful presentation system that allows three source devices to be connected to a remote display at up to 70 metres. This device uses three key components that create smart, autonomous presentation, education or collaboration spaces.
An HDBaseT multi-AV transmitter with support for HDMI, VGA with audio and USB inputs which can be surface mounted. An HDBaseT receiver with dual channel analogue audio extraction, microphone input, RS232 and USB control from an interactive board, designed for discreet installation. Finally, a separate wall mounted room control panel is included to quickly switch between input devices, adjust volumes and power on or off the display.
Both the multi-AV transmitter and control panels are both designed using PoH (power over HDBaseT) which provides power to both units alongside data using a standard Cat.6 network cable. This removes complexity from installations by allowing a single power supply to provide power to the entire system.
4K UHD video, multi-channel & digital audio formats including DTS-X & Dolby Atmos can be transmit 40m (131.23ft) over a single HDBaseT connection allowing the receiver can be conveniently placed in a wall or ceiling cavity depending on the locations of other connected devices such as a display, projector, sub-woofers and speakers. Distances up to 70m (229.66ft) are possible with 1080p video signals.
The inclusion of a relay port on the receiver allows room automation with devices such as a motorised projector screen or lighting to be configured to trigger once video devices are connected or disconnected.
Using reliable HDBaseT technology, single cable installation and PoH means this system is perfectly suited for education in a classroom or training room environment. Control over this system is managed through not only the wall plate, but also from a web GUI which is freely available on any device occupying the same network, including mobile devices. This can be used to switch or set a video input, display device connection status_, determine when the relay device is used and much more.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please note: The Transmitter Wall Plate requires a double gang US Style backbox and the Control Wall Plate requires a single gang US style backbox, both with hole spacing of 8.33cm (3.281 )
Fitted socket DE with cover frame for housing a keystone module based on the German system.
Fitted socket DE with cover frame for housing the AV extender modules and snap-in connection modules based on the German system
Use in conjunction with a Single Surface Pattress Box.
This single gang face plate is designed to be used with the LINDY Modular AV Extender Wall Plate System or AV Face Plate System which are designed to extend a combination of audio and video signals over low cost Cat5e/6 cable.
Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations.
2 modules can be installed in this face plate. If installing a single module, a blanking plate can be used for a tidier installation.
Also available are a range of accessories including face plates, back boxes and bulk cable for a total extender solution.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.
 |
 |
Lindy AV components include HDMI and DisplayPort splitters, matrix switches, extenders, converters and scalers, EDID emulators, as well as wall plates and display mounts. The products are used in conference rooms, training centers, control rooms, broadcast studios, and digital signage installations.
What is the difference between a splitter, switch, and matrix?
A splitter distributes one signal to multiple displays. A switch selects between multiple sources for one display. A matrix connects multiple sources to multiple displays simultaneously.
What is an EDID emulator used for?
EDID emulators ensure that source devices receive display information even when the display is temporarily disconnected or switched off important for digital signage setups and matrix installations.
What range do AV extenders offer?
HDBaseT extenders over Cat.6/Cat.6A typically reach up to 100 meters; fiber-based AV extenders allow significantly greater distances [UNVERIFIED: specific range depends on model].
