We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
The Lindy DVI EDID Emulator is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM extenders, switches and splitters. It can also be used in place of a monitor to keep the graphics card of a PC or server awake for remote access via IP. With support for resolutions up to 2560x1600@60Hz, the emulator is suitable for use with legacy PCs and displays. When used with the Lindy EDID recorder (32120) this device can provide cloned EDID information to the graphics card.
It is also possible to use the Emulator without cloning a display as it comes complete with pre-set EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.
The Lindy DVI EDID Emulator with Cloning is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV / KVM Extenders, Switches & Splitters. It can also be used in place of a monitor to keep the PC or Server awake for remote access over IP.
Problems can occur when using various AV devices such as KVM Switches, Splitters & Extenders amongst others. These devices are often unable to pass the EDID information back to the source device. This emulator allows the user to clone the EDID information from a display which can be provided to the source prior to the installation of any intermediary devices.
This Emulator also includes pre-set EDID data which includes the most commonly used DVI resolutions and refresh rate combinations, which allows for simple installation as it can be used with many displays quickly without the need to clone EDID information.
The Lindy DVI to VGA converter converts signals from a DVI-D equipped source into a VGA signal. It supports resolutions up to 1080p and 1920x1200 for VGA displays. This allows the connection of DVI capable devices, such as PC_s, notebooks and ultrabooks, to an older VGA display or projector.
This converter can also be used to add a secondary monitor for extended or mirrored desktop modes to increase productivity and screen real estate. With its lightweight, low profile design and plug & play installation this converter is perfect for use while travelling.
The Lindy Fixed Wall-Mounted Monitor Arm is the perfect solution for optimizing your workspace, gaming station, or home entertainment setup. Designed to support screen sizes ranging from 10 to 26 inches, this versatile mount offers a robust build with a maximum load capacity of 20 kg, ensuring your monitor or small TV is securely held in place. Its pivot able design allows for a tilt range of -15° to +10°, making it easy to find the most comfortable viewing angle, while the 180° pivoting range across two joints adds flexibility for corner installations or shared viewing spaces.
The compact wall mounting plate ensures a secure and streamlined fit on most walls, keeping your setup sleek and organized. With support for VESA standard mounting holes up to 100x100, this monitor arm is compatible with a wide range of devices, making it a reliable and practical choice for any space. Whether you're looking to declutter your desk or enhance your viewing experience, this monitor arm combines durability and functionality in a compact design.
Please ensure that your display is VESA compatible and does not exceed the maximum supported weight of 20kg. This mount is also not suitable for monitors with recessed VESA mounts.
The Lindy Full HD 1080p Webcam with Microphone is designed for video calls and conferences. Resolutions up to 1080p at 30 frames per second ensure smooth video and high resolutions alongside clear images thanks to a 6 layer glass coated lens.
Plug & Play installation means that users don_t have to worry about complex driver installs, simply connect the Webcam and the installation will begin automatically by the operating system.
The webcam features a foldable clip, which makes mounting on displays and laptops easy, and a 1/4 inch tripod thread. The 360° swivel design offers even more flexibility in use. Sharpness can be adjusted manually by turning the silver focus ring. This Full HD Webcam is compatible with all common platforms like Skype, YouTube, Teams, Zoom, Facetime etc.
IP extenders provide reliable extension of HDMI® signals on a network connection, allowing for point to point and mixed configurations when combined with network equipment such as switches. Utilising IP connectivity ensures a low cost, scalable extension solution that can be easily setup for a variety of small or larger scale scenarios.
The Lindy HDMI® & IR over IP extender is a complete, low cost solution for extending HDMI® signals across long distances via a local network setup. As a point to point connection, the extender supports distances up to 150m using Cat.6 cable, or when combined with a network switch can be expanded for much larger distribution systems with up to 3 layers of network equipment. Adding additional receivers (38399) provides additional flexibility to the setup to distribute content into various locations or displays at distance, great for use in retail, connected office installations or educational setups.
Supporting resolutions up to Full HD 1920x1080@60Hz 4:4:4 8bit, this extender provides high quality content, good for eye catching digital signage, residential installations or AV distribution in hospitality. HDMI® loop out port on the transmitter allows the user to connect a local display while IR extension also provide simple control via an included IR emitter and receiver cable using an IR remote.
Please Note: Use a dedicated network specially for larger installations. The HDMI® over IP Extender distributes in full 1080p resolution using H.265 video compression.
IP extenders provide reliable extension of HDMI® signals on a network connection, allowing for point to point and mixed configurations when combined with network equipment such as switches. Utilising IP connectivity ensures a low cost, scalable extension solution that can be easily setup for a variety of small or larger scale scenarios.
The Lindy HDMI® & IR over IP receiver is a supplementary solution for extending HDMI® signals across greater distances via a local network setup and creating scalable IP installations by using multiple receivers when combined with 38398 and network equipment. As a point to point connection, the extender supports distances up to 150m using Cat.6 cable, or when combined with a network switch can be expanded for much larger distribution systems with up to 3 layers of network equipment. Adding receivers provides additional flexibility to the setup to distribute content into various locations or displays at distance, great for use in retail, connected office installations or educational setups.
Supporting resolutions up to Full HD 1920x1080@60Hz 4:4:4 8bit, this extender provides high quality content, good for eye catching digital signage, residential installations or AV distribution in hospitality. IR extension also provide simple control via an included IR emitter and receiver cable using an IR remote.
Please Note: Use a dedicated network specially for larger installations. The HDMI® over IP Extender distributes in full 1080p resolution using H.265 video compression.
The Lindy HDMI® Audio Extractor is an effective solution for extracting audio from a HDMI® source to both digital and analogue audio devices, while sending the video signal to a 4K display or projector.
The extractor supports high quality 4096x2160@30Hz resolutions with additional pass-through support for CEC, to allow source devices to be controlled from a TV control, and HDCP 1.4, this is ideal for use with source devices such as set top boxes, games consoles and Blu-Ray Players.
This audio extractor allows output to both digital formats via Optical and HDMI® and analogue via L/R connections, ensuring seamless compatibility with an amplifier, sound bar or 2-channel speaker setup. With support for multi-channel audio including DTS: HD and Dolby Digital 5.1, this device will ensure an impressive three-dimensional surround sound performance to compliment films, games and music when connected to an audio device. The 3.5mm analogue connection ensures 2-channel speaker set ups can also be connected to the extractor, perfect for use with PC monitors which may require seperate speakers.
Featuring a neat switch to fully control which source audio EDID is used and the ability to be powered via USB from the source or display device, the extractor provides simple use and installation, great for both AV installations in the home or in commercial settings. With a minimalist and stylish design, it can also be hidden out of sight to compliment the popular trend of discreet AV installations.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Lindy HDMI® 18G to DisplayPort 1.2 Converter allows the connection of HDMI® source devices, such as a PC, Blu-ray player or media player to DisplayPort monitors digital signage and LFDs (Large Format Displays). Supporting resolutions up to 3840x2160@60Hz 4:4:4 8bit or 2560x1440@120Hz, this converter ensures superior clarity content within innovative workspaces, engaging collaboration environments and educational setups. Immersive multi-channel audio is supported up to 7.1CH to compliment the video on screen.
The converter can also be used to add another display to extend the available desktop workspace and increase productivity. It is also ideally suited for travelling due to its compact, lightweight form factor and convenient Plug & Play installation.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Lindy HDMI® 10.2G EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM extenders, switches and splitters. It can also be used in place of a monitor to keep the graphics card of a PC or server awake for remote access via IP.
With support for resolutions up to 2160p including the ability to pass_through HDCP content, the Emulator is suitable for use with a wide variety of PC and AV applications. When used with the Lindy HDMI® / VGA / DVI EDID Recorder (32120) this compact device can provide cloned EDID information to your graphics card.
It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.
Please note: This Emulator does not support HDMI® 4K60 or HDCP 2.2 content. If you require this then please see our complete range of EDID emulators.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
 |
 |
Lindy AV components include HDMI and DisplayPort splitters, matrix switches, extenders, converters and scalers, EDID emulators, as well as wall plates and display mounts. The products are used in conference rooms, training centers, control rooms, broadcast studios, and digital signage installations.
What is the difference between a splitter, switch, and matrix?
A splitter distributes one signal to multiple displays. A switch selects between multiple sources for one display. A matrix connects multiple sources to multiple displays simultaneously.
What is an EDID emulator used for?
EDID emulators ensure that source devices receive display information even when the display is temporarily disconnected or switched off important for digital signage setups and matrix installations.
What range do AV extenders offer?
HDBaseT extenders over Cat.6/Cat.6A typically reach up to 100 meters; fiber-based AV extenders allow significantly greater distances [UNVERIFIED: specific range depends on model].
