We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
From the Lines cable connectivity concept developed by Lindy, Gold Line Ultra High Speed HDMI® cables are the no compromise, high performance connection solution for use in the most demanding professional environments.
Gold Line Ultra High Speed HDMI® cables feature triple shielded construction with 30AWG OFC conductors for premium performance and corrosion resistance. High quality 24K gold plated contacts and connectors maintain optimal signal integrity and maximum reliability.
Resolutions up to 10K 10240x4320@120Hz 4:2:0 12bit are supported. Gold Line HDMI® cables are also capable of transmitting high bit rate 32 channel audio and Dolby® Atmos.
These superior quality cables utilise a unique low attenuation design that ensures consistent and reliable transmission even over very long distances.
The HDMI® specification is supported for 48G bandwidth capacity in cable lengths up to 5m. Ultra High Speed Gold Line HDMI® cables are available in lengths from 1m to 5m.
HDMI® Specification cables now support the following features:
Lindy Power Cables are high quality, reliable power delivery connections for use in a wide variety of professional and home environments.
This cable is ideal for the connection between computers, monitors, printers, projectors and many more devices with IEC C14 ports and the English electricity grid. Therefore, it is perfect for use in offices, control rooms, digital signage and home theatre setups.
The brass used in the connectors has a lead content of far below 0.1% and is therefore SVHC-free, as are all other materials used in these cables.
Please note that this cable is for use in dry areas only.
UK 3 Pin to IEC C13 Mains Cables are available in the following lengths: 0.2m, 0.7m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m and 20m.
Lindy Power Cables are high quality, reliable power delivery connections for use in a wide variety of professional and home environments.
This cable is perfect for the connection between a notebooks' power supply and the German or French electricity grid. It is an ideal replacement for a missing or damaged laptop power cable as the C5 connector is used on most major laptop power supplies.
The brass used in the connectors has a lead content of far below 0.1% and is therefore SVHC-free, as are all other materials used in these cables.
Please note that this cable is for use in dry areas only.
Schuko to IEC C5 Mains Cables are available in the following lengths: 2m, 3m and 5m.
Lindy Power Cables are high quality, reliable power delivery connections for use in a wide variety of professional and home environments.
This cable is ideal for the connection between computers, monitors, printers, projectors and many more devices with IEC C14 ports and the German or French electricity grid. Therefore, it is perfect for use in offices, control rooms, digital signage and home theatre setups.
The brass used in the connectors has a lead content of far below 0.1% and is therefore SVHC-free, as are all other materials used in these cables.
Please note that this cable is for use in dry areas only.
Schuko to IEC C13 Mains Cables are available in the following lengths: 0.7m, 2m, 3m and 5m.
Lindy Power Cables are high quality, reliable power delivery connections for use in a wide variety of professional and home environments.
This cable is ideal for the connection between computers, monitors, printers, projectors and many more devices with IEC C14 ports and the German or French electricity grid. Therefore, it is perfect for use in offices, control rooms, digital signage and home theatre setups.
The angled IEC C13 connector is ideally suited for small and narrow installations such as mounting racks with limited space at the back.
The brass used in the connectors has a lead content of far below 0.1% and is therefore SVHC-free, as are all other materials used in these cables.
Please note that this cable is for use in dry areas only.
Schuko to IEC C13 90° Mains cables are available in the following lengths: 2m, 3m and 5m.
Lindy Power Cables are high quality, reliable power delivery connections for use in a wide variety of professional and home environments.
The Schuko Extension cable is perfect for the extension of Schuko connections. The coupler has a child guard to prevent objects from being inserted.
The brass used in the connectors has a lead content of far below 0.1% and is therefore SVHC-free, as are all other materials used in these cables.
Please note that this cable is for use in dry areas only.
Schuko Mains Extension Cables are available in the following lengths: 3m, 5m and 10m.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S/FTP patch cords with 600MHz raw cable .
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S/FTP patch cords with 600MHz raw cable .
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S/FTP patch cords with 600MHz raw cable .
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S/FTP patch cords with 600MHz raw cable .
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S/FTP patch cords with 600MHz raw cable .
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White.
 |
 |
Lindy offers cables and adapters for virtually all common signal and transmission standards: HDMI, DisplayPort, DVI, VGA, USB Type-C, Thunderbolt 3/4/5, network categories Cat.5e to Cat.8.1, fiber optic (FO), as well as power cables for DC and IEC devices. The products are used in data centers, AV installations, offices, and industrial environments.
Which cable type is required for 4K transmission?
For 4K@60Hz with full color depth, an HDMI cable from HDMI 2.0 onwards or a DisplayPort 1.2 cable is recommended. For 8K or higher data rates, DisplayPort 1.4/2.1 or HDMI 2.1 is required.
When is an active cable necessary?
Active cables are used over longer distances where passive cables can no longer transmit the signal stably for HDMI typically from 1015 meters, for USB 3.x already from around 3 meters.
Which network category is suitable for 10G Ethernet?
Cat.6A reliably supports 10G Ethernet up to 100 meters. Cat.7 and Cat.8.1 offer additional shielding and higher reserves for environments with electromagnetic interference.
