• Adds a VGA port, a USB Type A port and a Type C power supply port to your computer
• Supports VGA resolutions up to 1920x1200p 60Hz
• Supports USB 3.1 Gen 1 SuperSpeed 5Gbps data transfer rates
• Supports Type C power supplies up to 60W
• 2 year warranty

The Lindy USB 3.1 Type C to VGA, USB & Power Delivery Converter allows users to maximise the functionality of a single USB 3.1 Type C port by connecting and simultaneously using a VGA display and USB 3.1/3.0 SuperSpeed peripheral as well as a USB Type C power supply to a MacBook, ultrabook or notebook. The only requirement is that the computer supports the DisplayPort Alternate Mode.

With support for resolutions up to 1920x1200p 60Hz, the converter is ideal for use by designers and video editors. Installation is simple as no drivers are required and the Type-C's reversible design has been developed to work regardless of which way the cable is inserted into the port.

Information about USB 3.0, 3.1 & 3.2

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

• Standalone cloning functionality, no computer required
• Full bitwise cloning including MBR and EISA partitions

• SuperSpeed USB 3.0 5Gbps interface

• Dual Bay design accepts either 2.5" or 3.5" SATA disk drives
• Power supply and connection cables included
• Compatible with Windows ME/2000/XP/Vista/7/8 & Linux

• Converts mSATA and M.2 (NGFF) SSD into a 2.5' drive form factor
• Install smaller SSD hard drives into older machines with SATA interface
• Perfect for upgrading a laptop, notebooks or older PCs
• Supports SATA III 6Gbps with DevSlp function
• Adapter is transparent to the OS, so does not require any software drivers
• 2 year warranty

Please note - If both M.2 and mSATA SSDs are installed, only the M.2 SSD will be accessible.

This adapter converts an mSATA or M.2 SSD to a 2.5' drive form factor.

It supports DevSlp allowing SSD to go into a low power 'device sleep' mode.

It is the perfect solution for using mSATA or M.2 SSD in a laptop, netbook or other computer's standard 2.5' drive bay.

This adapter has an internal mSATA 52 pin connector and a M.2 B Key slot as well as an external 2.5' SATA 22 pin connector.

All within the dimensions of a 2.5' drive with a 9.5mm height.

M.2 was formally called Next Generation Form Factor (NGFF) and it is intended to replace mSATA, which uses the PCI Express Mini Card physical layout.

The following M.2 formats are supported - Type 2280, 2260, 2242 and 2230. Both Half and Full Size mSATA SSD are supported.

• USB 3.0 specification with up to 5 Gbit/s, compatible with USB 2.0/1.1

• Provides 3 USB 3.0 ports and a Gigabit Ethernet interface

• Compatible with IEEE 802.3, 802.3u, 802.3ab (10BASE-T, 100BASE-TX, 1000BASE-T)

• The Ethernet interface supports both full= and half-duplex mode

• USB 3.0 3 Port Hub compatible with BC (Battery Charging) specification 1.2, loads devices up to a max. of 1.5A per port

• USB bus-powered or self-powered

• An additional power supply may be needed for devices with a high power consumption. We recommend LINDY Art. No. 73846

• Operating systems: Windows XP/Vista/7/8, LINUX Kernel 2.6.31 and above, and Mac OS 10.8 and later

• Designed for home theatre and professional AV installations
• Compatible with all optical SPDIF equipped devices which use the TosLink / optical SPDIF interface
• High grade fibre optic core with bronze ferrule for the clearest, most accurate digital audio transmission
• Ultra flexible triple layer protective jacket for advanced protection
• Sturdy, gold plated metal connector body for added strength
• Fully quality tested
• 25 years warranty
• Available in lengths from 0.5m to 50m

This digital optical cable is part of a wide range from LINDY including TosLink, Premium Gold TosLink, Mini Optical and TosLink to Mini Optical cables.

Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation.

• Bus Type: CardBus
• Speed: Up to 115,200Kbit/sec
• Plug & Play
• Card Connector: 25 Way D Male
• Adapter Cable: 25 Way D Female to 2 x 9 Way D Male
• Software Compatibility: ME/2000/XP/Vista/Windows 7/Server 2003, 2008
• 2 Year warranty

• Pack of two Phono/RCA Baluns
• Extends RGB, RBG, YUV Component video signals over CAT5e/6 or higher cable
• Supports distances of up to 300m*
• Perfect for home cinema, presentation, CCTV etc.
• Consists of local and remote snap in modules
• Use with our single or double gang face plates
• Simple punch down IDC termination
• May be flush or surface fitted using a suitable pattress box
• Requires a back box with a minimum depth of 44mm
• Colour: White
• 2 year warranty

This set of two Phono/RCA Baluns are part of our range that employs balun technology to extend a combination of audio and video signals over low cost .

Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations designed to be fitted to our single gang face plate or double gang face plate.

* Note: Maximum transmission distances will depend on the application and the twisted pair cable used. These products are designed for use with a single network cable connected between the transmitter and the receiver.

Video signal quality will vary depending on the length and type of cable used and in some cases may be extended beyond 300m.