Hidden Category Shop

Your filter options:

Connections

You are here: » Homepage

Cardbus to ExpressCard/34 Adapter

ExpressCard card, 1 Port
Use CardBus/PCMCIA cards in the ExpressCard slot
This ExpressCard/34 adapter allows you to connect 32Bit CardBus cards (USB 2.0, FireWire, GigaLan, eSATA, Wireless .........) to a notebook with ExpressCard/34 or ExpressCard/54 slot.
Note: The ExpressCard/34 adapter must be inserted together with the CardBus card when booting up the computer! No hot-pluggable support

No.: 51355

USB 2.0 to DVI Adapter

Supports DVI and VGA Displays
USB 2.0 Compliant (USB 1.1 not supported)
Up to 6 adapters can be connected to one PC
Bus Powered
Displaylink chipset
Supports Resolutions up to 2048 x 1152 (32 Bit)
Supports video playbck up to 1080p
Requires a minimum 1.2GHz single core processor
Supports up to 6 USB displays simultaneously
Hot plug: easily add or remove displays without the need for system reboot
Windows XP/Vista/7/8 compatible
2 year warranty

No.: 42728

2 Port USB 3.0 Card, PCI

This product has been discontinued and replaced by Part No 51083.

Easily upgrade your computer or add additional SuperSpeed USB ports with this PCI card.

Bus Type: PCI

Speed: SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
Compliant with PCI Rev. 3.0 specification
Compliant with USB 3.0 Rev. 1.0 specification
Each USB port supplies +5VDC/900mA
Supports USB 3.0, USB 2.0, and USB 1.1 devices
Connectors: 2 x Type A USB Female
4 Pin power connector for receiving power from the host system power supply
Chipset: NEC
Software Compatibility: Windows 7 (32/64bit), Vista, XP, 8
Includes standard & low profile bracket

2 Year warranty

No.: 51082

USB 3.0 Docking & Clone Station Premium

This product has been discontinued and replaced by Part No 43231.

Connected and Standalone cloning station
Connects 2 SATA HDD/SSDs to a computer using a single connector
USB 3.0 SuperSpeed 5Gbps Interface
Accepts 1.8/2.5/3.5” HDD/SSDs with 22 pin SATA combo interface - for Micro SATA please use LINDY 33502.
Features auto-spin down after being idle for 5 minutes
Compatible with USB 3.0 equipped computers (Software support for Windows only)
2 year warranty

The LINDY USB 3.0 Docking and Clone Station Premium can be used as both a dual SATA docking station and standalone cloning station that creates a bit-by-bit clone of the source drive onto a target Drive.

The Docking & Clone Station also provides additional features for Windows computers following the installation of the included software. The software can be activated upto a maximum of 5 times.

A Software Clone function allows you to choose if you use an external or internal hard drive as the cloning source for the target hard drive. It is also possible to clone from bigger to smaller hard drives, with software that resizes the partition accordingly.

Additionally, a Flash Copy function allows cloning to be carried out twice as fast as other USB 3.0 Cloning Stations. While a Disk Erase function allows you to completely delete the data on the hard drive safely, securely and permanently.

Please Note - A completely full, large source hard drive cannot be copied to a smaller target drive.

For software installation an active internet connection during installation and activation is necessary.

Package Contents:

USB 3.0 HDD Docking and Clone Station Premium

USB 3.0 Type A to Type B connecting cable, 90cm

12V 3A w/ Euro or UK External power supply with a 1m DC cable and 5.5/2.1mm barrel connector

Software CD for offline cloning and Flash Copy for USB 2.0 (Windows Only)

LINDY manual

No.: 43116

2 Port HDMI 2.0 18G Splitter

This product has been discontinued and replaced by Part No 38235.

Allows you to split a single UHD source to 2 UHD displays
Supports video resolutions up to 4K2K@60Hz 8 Bit including 3D 1080p
Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
HDCP 2.2 compliant for use with the latest AV equipment
2 year warranty

This state of the art 4K HDMI 2.0 18G splitter is capable of displaying resolutions up to 3840 x 2160 to one UHD signal in and to 2 UHD signals out. The splitter is also HDR (High Dynamic Range) compatible to reproduce a greater dynamic range of luminosity when used with imaging and photography.

With full support for HDCP 2.2 and HDMI 2.0, you can be sure that this product is fully future proof and ready for the new and demanding audio and video signals on the market.

The built in EDID switch panel allows you to select the resolution setting to avoid incompatibilities with different brands of monitors.

Package Contents:

2 Port HDMI 18G Splitter

5V Multi Country PSU

LINDY QIG

No.: 38240

USB User Client for Windows MultiPoint Server

Low cost reliable solution for use with Windows MultiPoint Server 2011
Save money on equipment, set up, power and maintenance costs
Easy to install and set up - connects to the host computer via a single USB cable
VGA port for connecting to a monitor (supports resolutions up to 1600 x 1200)
Features 4 USB 2.0 ports for connecting a keyboard, mouse and other USB peripherals, such as a pen drive or printer
Microphone and stereo speaker sockets for full audio support
Very compact, low profile design which can be placed flat, stood vertically using the supplied stand or fixed to the VESA mounting points on the back of a monitor
Supplied with a multi-country power supply, 1.9m USB connection cable and desk stand
Dimensions: 97 x 97 x 20mm (WxDxH)
2 year warranty