We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
This adapter cable accepts video signals via DVI-D input and converts it into a Mini DisplayPort signal. This allows DVI-D equipped workstations or PC’s to be connected to modern Mini DisplayPort monitors, with support for DVI-D single link resolutions up to 1200p 60Hz (1920x1200).
Due to its lower power design the converter can typically be powered directly from a PC’s DVI-D port. In cases where the power output of the DVI-D port is insufficient (lower than 450mW) the integrated USB cable can be connected to a USB port or USB power supply to power the converter.
Package Contents:
DVI-D to Mini DisplayPort Adapter Cable
The Lindy DVI to DisplayPort Cable is ideal for connecting a DVI equipped source such as a PC or laptop to a DisplayPort display. It supports high definition video resolutions up to 1920x1200@60Hz.
The cable can also be used to add another display to extend available desktop workspace and increase productivity. For added convenience, a USB power cable is integrated for connection to a USB port or a power supply to power the converter cable.
The Lindy USB 3.1 Gen 2 mSATA SSD Enclosure allows the connection of an mSATA SSD as a portable external drive at USB 3.1 Gen 2 10Gbps speeds while also supporting the SATA 6Gbps interface to guarantee high data transfer rates. UASP support also ensures faster speeds for UASP enabled computers.
The Lindy USB 3.1 Gen 2 mSATA SSD Enclosure supports Full & Half Size mSATA SSD form factors. Easy to install, the enclosure is bus-powered so requires no external power supply.
Information about USB 3.0, 3.1 & 3.2
USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.
Ever wondered why your computer desk has holes in it?
The LINDY In-Desk USB Hub fits neatly into your desks pre-cut holes and connects easily to your computer to provide an extra 3 USB 3.0 ports, a card reader and audio ports for the connection of a headphone or speakers and a microphone. The clever design keeps your desk clutter down to a minimum whilst still giving you quick and easy access to USB ports.
The integrated card reader supports the following card types:SDXC / SDHC / SD / Micro SDHC / Micro SD / MMC / RS-MMC
The main body of the hub can be removed from its outer ring to aide installation. This outer ring can then be used for cable management as well as the hub's home.
The USB In-Desk Hub is perfect for use with USB storage devices and USB cables to connect your peripherals.
* Please Note: This hub is bus powered - it takes its power from the computer's USB port.
You can use it with both bus-powered USB devices (e.g keyboards, pen drives, MP3 players) and self-powered USB devices (e.g. printers and external hard drives with their own power supplies). When used with bus-powered peripherals it can support 3 devices with a total power consumption of up to 900mA. If you require additional power to be available for BUS powered devices, a power supply (not included) can be connected.
The Lindy 4 Port VGA Splitter is a professional solution for splitting PC video content across four separate VGA displays, with simultaneous playback.
Supporting resolutions up to 2048x1536, this splitter is perfect for engaging educational installations, eye catching digital signage or display testing that utilise legacy PC’s and monitors. This splitter is also cascadeable up to three layers, allowing for much larger display installations, all showing the same content from one VGA source device.
Please note: distances may vary on the quality of the cable used within the installation
Adds 4 x USB 3.0 ports to your PC using the PCIe slot.
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The 100% Component test slip included in each polybag ensures flawless compatibility between devices, each component of the cable is individually tested helping to eliminate problems such as insertion loss, return loss and crosstalk.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red.
\n \r\n
\n\n Use this RJ45 port lock around RJ45 sockets to prevent unwanted connection of connection cables. Also prevents unauthorised access via the network.\n
\n\n
\n\n The lock secures itself to the RJ45 port and can be removed again with the appropriate key. It locks with the front panel of the RJ45 port inside the housing prevent it from being simply pulled out.\n
\n\n
\n\n
\n\n Safety information:\n For safety reasons, please note that these locks can also be removed without the key with skill and an appropriate tool.\n
\n\n
\n\n Please note:\n this key is only compatible with the corresponding colour of port blocker.\n
"
This range of USB 2.0 Typ C to Lightning cables provide a reliable and effective charging solution for iPhones, iPads and other Apple devices, utilising not only a reinforced shielding and jacket structure but also an optimum strain relief, tested to bend over 100,000 times before failure. A revolutionary resistant yet flexible solution to prevent splitting and snapping.
The cable also comes supplied with a Lindy hook-and-loop tie wrap, providing a neat, handy solution to avoid the cable tangling.
MFi Certified
This product has been certified under the Apple MFi programme. Made for iPhone/iPad/iPod logos communicate to customers that an electronic accessory has been designed to connect specifically to iPhone, iPad or iPod, and has been certified by the developer to meet Apple performance standards.
Please note: see Technical Information for PC/Android device requirements
The Android OS Mirroring & KM Sharing Cable allows you to display, mirror and interact with your Android mobile device on a Windows desktop. It also allows you to use a computers full size display, keyboard and mouse with your Android Smartphone.
 |
 |
