• High strength USB 2.0 Type C charge & sync cable for iPhones, iPads and other Apple devices with Lightning connection
• Cotton braiding and optimized strain relief to withstand over 100,000 bending cycles
• Apple MFi-certified, uses the C94 Lightning connector
• Quickly charge mobile devices with Power Delivery 2.0
• Supplied with a complimentary hook-and loop tie wrap, 2 year warranty

This range of USB 2.0 Typ C to Lightning cables provide a reliable and effective charging solution for iPhones, iPads and other Apple devices, utilising not only a reinforced shielding and jacket structure but also an optimum strain relief, tested to bend over 100,000 times before failure. A revolutionary resistant yet flexible solution to prevent splitting and snapping.

The cable also comes supplied with a Lindy hook-and-loop tie wrap, providing a neat, handy solution to avoid the cable tangling.

MFi Certified

This product has been certified under the Apple MFi programme. Made for iPhone/iPad/iPod logos communicate to customers that an electronic accessory has been designed to connect specifically to iPhone, iPad or iPod, and has been certified by the developer to meet Apple performance standards.

• Bus Type: PCI Express (x1)

• Speed: SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
• Compliant with USB 3.0 Rev. 1.0 specification
• Compliant with PCIe 2.0 Specification
• Each USB port supplies +5VDC/900mA
• Supports USB 3.0, USB 2.0, and USB 1.1 devices
• Connectors: USB 3.0 Type A Female (3 x External, 1 x Internal) & 15 Way SATA Power
• Chipset: TI
• All ports are silicon fused
• Software Compatibility: Windows 7 (32/64bit), Vista, XP, Includes standard and low profile brackets

• 2 Year warranty

• Connect USB enabled servers, desktop or notebook computers to PS/2 KVM switches
• Emulates the presence of a USB keyboard and mouse - no delay when switching channels
• Can emulate particular keyboard styles - extra keys are reported to host computer
• Allows PS/2 keyboard hotkey commands to emulate additional Mac and SUN keyboard commands
• 2m moulded cable with miniature conversion circuit neatly moulded into the centre
• 3-in-1 KVM combined cable for minimum clutter
• Heavily shielded coaxial RGB video cable
• DDC support for "Plug & Play" monitors
• Flash upgradeable for future enhancements
• Low power consumption
• USB Type A Male & 15 Way HD Male to 2 x 6 Pin Mini DIN Male & 15 Way HD Male, 2m

• Share a USB 3.0 Super Speed peripheral between 4 computers
• Switching between computers with a simple button press
• Combine with a USB hub to share multiple devices e.g. printers, scanners
• Bus-powered with no external power supply required
• 2 year warranty

The Lindy 4 Port USB 3.0 Switch allows up to 4 users to share a USB 3.0 peripheral without the need to repeatedly swap cables or set up complicated network sharing software. The active computer port can be selected by push button. The switch is ideal for sharing a printer or scanner in a small office environment.

The 4 Port USB 3.0 Switch is backwards compatible with USB 2.0 and USB 1.1 devices and supports all USB equipped computers - perfect for use at home with multiple PCs or Macs.

Information about USB 3.0, 3.1 & 3.2

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

• Advanced Format 3TB support
• Compatible with Windows XP/Vista/7 and Linux

• Back up, restore and transfer data from a SATA HDD/SSD
• Supports SATA up to 6Gbps
• USB 3.1 Gen 1 / USB 3.0 SuperSpeed standard with data rates up to 5Gbps
• Compatible with USB Type A equipped computers
• 2 year warranty

This Lindy USB 3.0 to SATA Converter allows users to easily connect high performance 5.25", 3.5" or 2.5" SATA drives without having to install the drive in an enclosure or computer. It is an ideal tool for computer technicians as well as for private users for quick backups.

With plug & play installation, the converter can be easily connected and used instantly.

The included mains adapter powers the connected hard drive. The USB 3.0 to SATA Converter does not directly support 3.3V HDD/SSDs; for drives which require 3.3V, please use a SATA/Micro SATA Adapter.

Information about USB 3.0, 3.1 & 3.2

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

• Converts a HDMI signal into a DisplayPort signal, NOT bidirectional
• If used with a Mini DisplayPort monitor can be associated with the adapter LINDY Art. 41022

* Warning: Some Apple Cinema Display Thunderbolt / DisplayPort can support resolutions up to 720p (1280x720) or may not be compatible with this connection. Apple monitors do not support high resolutions using the DP protocol but only through EDID protocol Thunderbolt EDID.

• Overall length: 1m
• Color: Black
• 2 year warranty

Technical specifications:

• Complies with DisplayPort 1.2 and 1.3 DPCP
• Complies with HDMI 2.0, HDCP 1.1
• Supports resolutions HDMI 3D 1080p120 24 bit
• Supports 4K (3840 x 2160 @ 30 Hz)
• Supports data transfer rates of HBR (5,4Gbit / s) and RBR (1.62Gbit / s)
• Supports digital audio signals up to 192kHz 24bit LPCM 7.1
• Supports EDID
• Active adapter cable, electronic HDMI connector

• 3.5" Enclosure for SATA drives
• USB 3.0 / USB 3.1 Gen 1 and eSATA interface
• Supports SATA up to 6Gbps
• Robust aluminium design for excellent heat dissipation
• 2 year warranty

The Lindy USB 3.0 & eSATA Enclosure 3.5" is an ideal solution to increase the storage and backup capabilities of a computer. Simply install a 3.5" SATA hard drive and connect it either to a computer's USB or eSATA port.

The enclosure features an On/Off power switch and is accompanied by a USB 3.0 Type A to B cable, an eSATA cable and an external power supply. The robust aluminium housing guarantees excellent heat dissipation.

• Pack of two Phono/RCA Baluns
• Extends RGB, RBG, YUV Component video signals over CAT5e/6 or higher cable
• Supports distances of up to 300m*
• Perfect for home cinema, presentation, CCTV etc.
• Consists of local and remote snap in modules
• Use with our single or double gang face plates
• Simple punch down IDC termination
• May be flush or surface fitted using a suitable pattress box
• Requires a back box with a minimum depth of 44mm
• Colour: White
• 2 year warranty

This set of two Phono/RCA Baluns are part of our range that employs balun technology to extend a combination of audio and video signals over low cost .

Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations designed to be fitted to our single gang face plate or double gang face plate.

* Note: Maximum transmission distances will depend on the application and the twisted pair cable used. These products are designed for use with a single network cable connected between the transmitter and the receiver.

Video signal quality will vary depending on the length and type of cable used and in some cases may be extended beyond 300m.