We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
Cat.6 U/UTP PVA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
Available lengths: 10m, 20m, 30m, 40m, 50m, 75m, 100m.
The Lindy 100m Cat.6 VGA Extender is a high-quality solution for extending analogue VGA signals over longer distances using standard network cable. Supporting resolutions up to 1920x1080, this system provides excellent picture quality in classrooms, lecture halls or presentations.
Provided as a complete extension solution, the Transmitter unit can be directly connected to a VGA source device such as PC, and output to the Receiver unit and display or projector, using a single standard Cat.5/6 cable. This provides a cost-effective solution for extending engaging content at greater distances within analogue AV installations.
Both Tx & Rx units are supplied within sturdy, metal housings with fixed mounting brackets and with no requirement for external power supplies, great for ensuring a tidy, manageable setup at either side of the installation.
Lindys range of Fibre Optic Hybrid DisplayPort cables are a high quality, advanced solution for creating longer length DisplayPort connections, not possible with standard copper only cables while also offering a lower cost alternative to fibre optic extender systems that can be directly connected to the source and display, with no requirement for additional cabling.
With a premium fibre and copper hybrid construction, signals are transmitted with no degradation, while also providing resistance to electro-magnetic and radio-frequency interference, perfect for integration into high noise environments including industrial or retail settings.
Support for resolutions up to 4K@60Hz and HDR ensures video can be viewed with flawless quality, enhanced brightness and a wider colour gamut, ideal for eye-catching digital signage in retail or engaging educational content in universities.
Lindy Fibre Optic Hybrid DisplayPort cables are an all-in-one advanced solution which provide transmission distances that far exceed the maximum supported by standard copper only cables.
Perfect for professional and home cinema environments these cables feature active fibre optic technology integrated into the DisplayPort connectors to allow signal transmission from a source to display over the longest possible distances.
Support for resolutions up to Ultra HD 4096x2160@60Hz 4:4:4 10bit makes these cables suitable for use with advanced DisplayPort enabled sources and displays.
The slimline copper and fibre hybrid construction allows easy installation into recessed, tight spaces. Advanced EMI & RF resistance makes these cables ideal for use in electronically sensitive environments.
Please Note: The cable can only be used in one direction. The connector labelled “source” must be connected to a source device. The connector labelled “display” must be connected to a projector or display.
The Lindy Fibre Optic USB 3.0 Cable supports far longer distances than standard copper cables whilst retaining SuperSpeed transfer rates of up to 5Gbps. Up to 3 cables can be connected in series up to a length of 300m. In addition, a combination with the 30m version No. 43345 is possible.
A lighter and more flexible construction makes this cable simple to install with cable trays and through conduits, whilst low RFI/EMI ensures that the cable can be installed in the most sensitive of environments. It supports isochronous data transfer, improving the timely delivery of data packets, which makes it ideal for synchronizing video and audio streams. This device is fully compatible with, and can be used to extend signals from, 4K USB 3.1/3.0 webcams and video conferencing systems.
For added convenience the Fibre Optic USB 3.0 cable also features a USB Type A cable, which can be connected should additional power be required.
Please note: This product is also backwards compatible with USB 2.0 peripheral devices.
Information about USB 3.0, 3.1 & 3.2
USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.
The Lindy 100m USB 2.0 Cat.5 Extender UTP can be used to extend the distance between a USB peripheral device and host computer by up to 100m. It consists of a local unit which connects to the computer and a remote unit that connects to the device. Standard, low cost UTP Cat.5/5e/6 network cable (not included) is then used to bridge the connection between the two units.
Connecting a USB hub to the receiver also gives additional access to a larger number of USB devices. For added convenience this USB 2.0 Extender is supplied with a power supply, which can be connected should additional power be required.
Please note: this extender is not compatible for use with webcams
The Lindy 100m USB 2.0 Cat.6 Extender can be used to extend the distance between a USB peripheral device and host computer by up to 100m. It consists of a transmitter unit which connects to the computer and a receiver unit that connects to the device. Standard Cat.5e/6 network cable (not included) is then used to bridge the connection between the two units. For best performance and compatibility, we recommend the use of solid core patched cables.
For added convenience this USB 2.0 Extender is supplied with a power supply, which can be connected should additional power be required.
*Please note: This extender might not support USB devices that require high bandwidths such as Full HD webcams.
The Lindy 100m USB 2.0 Type C Cat.6 Extender can be used to extend the distance between a USB peripheral device and a Type C equipped host computer by up to 100m. It consists of a transmitter unit which connects to the computer via USB Type C and a receiver unit that connects to a USB Type A device. Standard Cat.5e/6 network cable (not included) is then used to bridge the connection between the two units. For best performance and compatibility, we recommend the use of solid core patched cables.
For added convenience this USB 2.0 Extender is supplied with a power supply, which can be connected should additional power be required.
*Please note: This extender might not support USB devices that require high bandwidths such as FullHD webcams.
Featuring both a USB C and USB A the Lindy 100W USB Type A & C PD Car Charger can charge 2 devices simultaneously while on the move via any vehicle's auxiliary port. The USB C1 port supports up to 65W while the USB A1 port supports up to 35W.
Allowing for a maximum power of 100W to be shared between both ports, you can be sure your devices will charge at the best possible speed by utilising QC 4.0 (Quick Charge 4.0) technology and with the USB C port supporting PD 3.0 (Power Delivery 3.0) and PPS (Programmable Power Supply) this allows for real-time adjustment of voltage and current levels during the charging process, perfect for charging devices like smartphones, tablets, and laptops while traveling.
With universal compatibility with any vehicle's auxiliary port you never have to worry about compatibility. Featuring a premium aluminium finish this charger this charger and its minimalist design that complements all car interiors.
With support for both Samsung AFC and Apple QC on new generation devices this allows you charge quicker than before while also providing protection to your devices allowing them to receive the precise power, they need in any situation, also reducing heat allowing the battery to have a longer lifespan.
For safe charging the device includes overcharge, overcurrent, overtemperature and short circuit protection. Whether you're charging smartphones, tablets, laptops, or other devices.
The LINDY Transceiver Module allows a 10 Gigabit fibre optic connection to your network. Simply connect this module to your 10G Ethernet switch with a singlemode LC duplex cable for quick and easy connectivity.
Standard SFP+ Module for common networking systems like Cisco, HP, Dell, Ubiquiti, D-Link, Zyxel, Netgear, Arista, Juniper or for mainboards with SFP+ slots like SuperMicro, Asus, Gigabyte and Asrock.
The module is built to comply with MSA (Multi Sourcing Agreement) standards and uses the industry standard LC interface to extend your network connectivity up to 10Km. It is also is fully hot pluggable, which enables you to install it without powering down your network switch and interrupting traffic flow.
Please note: This module is only compatible with 10G switches. 1G or 10/100 switches are not supported.
The LINDY Transceiver Module allows a 10 Gigabit fibre optic connection to your network. Simply connect this 10GBase-SR module to your 10G Ethernet switch with a multimode LC duplex cable for quick and easy connectivity.
Standard SFP+ Module for common networking systems like Cisco, HP, Dell, Ubiquiti, D-Link, Zyxel, Netgear, Arista, Juniper or for mainboards with SFP+ slots like SuperMicro, Asus, Gigabyte and Asrock.
The module is built to comply with MSA (Multi Sourcing Agreement) standards and uses the industry standard LC interface to extend your network connectivity up to 400m. It is also is fully hot pluggable, which enables you to install it without powering down your network switch and interrupting traffic flow.
Please note: This module is only compatible with 10G switches. 1G or 10/100 switches are not supported.
 |
 |
