• Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
• Ideal for use as an LCD monitor cable or DVI projector cable
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• DVI-I cable for home and small office applications
• Supports DVI resolutions up to 1920x1200@60Hz and HDTV resolutions up to 1080p
• Robust PVC housing, nickel connectors, 24K gold plated contacts
• Tripled shielded cable, corrosion resistant tinned copper 30AWG conductors
• 10 year warranty

From the Lines cable connectivity concept developed by Lindy, Black Line DVI-I cables are fully featured, entry level connection solutions, perfect for connecting PCs to monitors or projectors.

Black Line DVI-I cables feature triple shielded construction with 30AWG tinned copper conductors for performance and corrosion resistance. Nickel connectors and 24K gold plated contacts maintain signal integrity and reliability.

The tough PVC housing incorporates an integrated finger grip for easy installation. Large thumb screws allow the connector to be tightened into place without the need for a screwdriver and a flexible strain relief prolongs cable life.

Black Line DVI-I cables support resolutions up to 1920x1200@60Hz including HDTV resolutions up to 1080p. These cables support both analogue and digital transmission.

Black Line DVI-I cables are available in lengths of 0.5m to 5m.

• USB 3.0 SuperSpeed Compliant
• Flat tape style cable
• Full Duplex cable capable of transfer rates up to 5Gbps
• Double shielded construction
• Fully moulded
• USB Type A Male to USB Type B Male
• Length: 3m
• 10 year warranty

This high quality USB cable has been designed to provide optimum performance when connected to USB 3.0 equipped PCs and peripherals.

Fully compliant with the USB 3.0 specification, the cable supports data transfer speeds of up to 5Gbps, and benefits from double shielded construction and fully moulded connector hoods to provide maximum strength and total reliability.

This special flat cable design allows the cables to be coiled up, making them ultra portable.

• Converts a DisplayPort signal into HDMI
• Supports resolutions up to 1920x1080@60Hz
• Can be used to add a secondary monitor for extended or mirrored desktop
• Quick and simple plug & play installation
• 2 year warranty

The Lindy Mini DisplayPort to HDMI Converter is ideal for connecting a Mini DisplayPort equipped source such as a PC or laptop to an HDMI monitor or TV. It supports video resolutions up to 1920x1080@60Hz and allows Audio pass-through if supported by the video source.

This converter can also be used to add a secondary monitor for extended or mirrored desktop modes to increase productivity and screen real estate. Internal copper shielding provides enhanced reliability and compatibility. The converter is also ideally suited for travelling due to its compact, lightweight form factor and convenient plug & play installation.

• Converts a DisplayPort signal into DVI
• Supports resolutions up to 1920x1200@60Hz
•  Can be used to add a secondary monitor for extended or mirrored desktop
• Quick and simple Plug & Play installation
• 2 year warranty

The Lindy Mini DisplayPort to DVI Converter is ideal for connecting a Mini DisplayPort equipped source such as a PC or laptop to a DVI monitor. It supports high definition video resolutions up to 1920x1200@60Hz. The converter is ideal for connecting modern laptops, notebooks and ultrabooks to older DVI displays or projectors.

This converter can also be used to add a secondary monitor for extended or mirrored desktop modes to increase productivity and screen real estate. Internal copper shielding provides enhanced reliability and compatibility. The converter is also ideally suited for travelling due to its compact, lightweight form factor and convenient plug & play installation.

• 2 x 100Base-TX devices to 1 port
• Low cost solution for adding extra connections
• Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
• No performance loss
• Saves adding additional cable runs
• Ideal for existing installations where additional cables cannot be installed easily

• Provides 4 USB 2.0 HighSpeed ports
• Supports data transfer rates up to 480Mbps
• Compatible with all USB Type A equipped computers
• USB bus-powered
• 2 year warranty

The Lindy 4 Port USB 2.0 Notebook Hub allows the user to connect 4 additional peripherals to a USB Type A equipped computer. Capable of data transfer speeds of up to 480Mbps, the hub is also backwards compatible with USB 1.1/1.0. Its compact and flexible design with rotatable USB plug make it the perfect companion for mobile devices, espceially when travelling. The hub is powered by the USB Bus and can be used with both bus-powered USB devices (e.g keyboards, pen drives) and self-powered USB devices (i.e. peripherals with their own power supplies, such as printers and external hard drives).

When used with bus-powered peripherals it can support 4 devices with a total power consumption of up to 500mA. With ‘Plug and Play’ installation, no drivers are required, therefore this hub can be installed with minimum difficulty, ideal for both professional and first time users. 

• Gold Plated connectors to prevent oxidisation for maximum reliability
• IEEE 1394b compliant
• Fully moulded
• Color: Transparent
• Length: 1m
• 10 year warranty

• Consists of 1 x Injector cable and 1 x Splitter cable
• Maximum voltage: 24V, Maximum current: 800mA
• Male and Female DC power jacks (2.1mm) for connection to device and power supply
• Ideal for use with existing installations where additional power cables cannot be installed easily
• 2 Year warranty

Please note: This passive POE adapter kit is intended for a point to point connection between the connected device and an active network connection. It must not be directly connected or routed through any network switches or routers. Operating distances may vary depending on the cable type used and the power requirements of the connected device.

Our Passive Power Over Ethernet Kit is a low cost solution designed for use with all network devices that operate with a supply voltage of up to 57 Volts DC. The simple adapter cables allow both power and data to be transmitted over a single network cable. It uses the unused data pairs to inject power over a single network cable. This kit is perfect for use with IP cameras, access points hubs and switches. Simply connect the power supply provided with your device to the injector cable and connect the splitter to your device.

Package Contents:

Passive PoE Injector

Passive PoE Splitter

• 25 Way D Male to 36 Way Centronics Male
• Bi-directional
• Full IBM specification
• 25 connections
• Fully moulded
• 10 year warranty

• Full CAT6 specification with moulded snagless boots

• Snagless strain relief prevents damage to the RJ-45 latch during installation and removal

• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• 10 year warranty