• Bus Type: ExpressCard/34

• Speed: SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
• Compliant with PCI Express Rev. 2.0 specification
• Compliant with USB 3.0 Rev. 1.0 specification
• Compliant with xHCI/extensible Host Controller revision 1.0
• Each USB port supplies +5VDC/900mA
• Supports USB 3.0, USB 2.0, and USB 1.1 devices
• Connectors: 2 x Type A USB Female
• Chipset: NEC

• Built-in power jack for optional adapter for use when the connected devices require additional power from the USB port

• Software Compatibility: Windows Vista (32/64bit), XP, Server 2003/8 (32/64), Windows 7, 8

• 2 Year warranty

• DVI-D Dual Link Extension Cable
• Dual Link digital connection supports display resolutions of up to 2560 x 1600
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
• Increased insulation resistance up to 25%
• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
• Tight fit of internal wires as there is no inner mould
• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
• Smaller overall dimensions which allows more room behind the host or peripheral
• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Allows DVI-D signals to be transmitted at distances of up to 80m using LINDY DVI Super Long Distance cables
• Supports resolutions of up to 1920 x 1200 and HDTV 1080p
• HDCP signal support
• No power supply is required for most installations as the module takes its power from the DVI interface
• An optional 5V DC PSU (1mm/3mm inner/outer diameter) can be used when the source device cannot supply a sufficiently high quality, stable DVI signal (for example, some older graphics cards)
• Dimensions: 75 x 55 x 20mm (WxDxH)

• 2 Way Digital Optical Audio Splitter
• Supports cables distances of up to 5m in and 5m out (for each output)
• Input ports: 1 x TosLink (Optical Fibre)
• Output port: 2 x TosLink (Optical Fibre)
• Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) digital audio signal output
• Supports compressed 2-channel and multi-channel Dolby and DTS audio signals
• Includes 5V DC multi country power supply
• Dimensions: 46 x 46 x 24mm (WxDxH)
• 2 year warranty

Please note: TosLink cables are not included, we recommend you use cables from the LINDY or cable range

2 Way TosLink Switch, SPDIF to Analogue and Analogue to SPDIF converters are also available.

• Connects 3 Type A USB peripherals to a Type C Port
• Supports SuperSpeed data rates of up to 5Gbps
• Features a USB Type C Female port for Power Delivery and data combined
• Compatible with all USB Type C equipped computers
• 2 year warranty

The Lindy 3 Port USB 3.1 Hub with Power Delivery provides 3 USB Type A SuperSpeed ports for connecting USB peripherals to a USB Type C equipped computer. For added convenience the hub features a combined USB Type C data & power port which supports power delivery up to 60W while transmitting data through a single cable. If a power supply is connected, the notebook or Macbook can be charged/powered via it's Type C port at the same time as operating the connected peripherals.

The Type C connectors reversible design was developed to find a connection regardless of which way the cable is inserted into the port, ensuring simple connectivity for both professional and first time users. 

Information about USB 3.0, 3.1 & 3.2

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

• Bus Type: 32 Bit CardBus
• Integrated DMA engines
• Speed: SATA-150
• I/O Address: Plug & Play
• IRQ Selection: Plug & Play
• NCQ (Native Command Queuing) support
• Via VT6421 chipset
• Card Connector: 2 x eSATA Female
• Software Compatibility: Windows 98SE/ME/2000/XP/Vista/Windows 7/Server 2003, 2008
• 2 Year warranty

• Can be used with DVI or HDMI equipped high definition set top boxes, satellite receivers, DVD players, computers, HDTVs and projectors
• Supports HDTV resolutions of up to 1080p, 3D and multi-channel digital audio
• HDCP compliant for trouble-free operation
• Supports maximum cable distances of up to 20m (10m in, 10m out)
• Very neat and compact design
• 2 year warranty

• RAID Adapter for connecting two SATA Drives to a host computer
• Supports SATA I (1.5Gbps) SATA II (3Gbps) SATA III (6Gbps), RAID 1, RAID 0, SPAN (Big Drive) and PM (2Drives) mode
• Automatic "Rebuild" function, Native Command Queue (NCQ) and auto-negotiation
• 100% OS-transparent supports PC, Mac and Linux (driver not required for modern OS)
• 2 years warranty

The LINDY 6 Gbps Hardware RAID Adapter allows you to connect two SATA hard drives to a single host port. The drives can then be set up in a variety of RAID configurations via the adapter jumpers to appear individually or as a single drive.

Note: Changing the RAID mode will lead to a reconfiguration of the disk array, erasing all data on the hard drives. Where possible, it is advised you backup any critical data before performing this task.

Package Contents:

1x SATA Host to 2x SATA Drives Adapter

SATA Power Cable

Driver CD - for older OS (under Windows 98)

LINDY Manual (English)

• Speed: Up to 921Kbit/sec
• Card Connector: 2 x 9 Way D Male
• Software Compatability: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, LINUX

• 2 Year Warranty

• 2 x LC Fibre Optic Male to 2 x LC Fibre Optic Male
• Compatible with all standard fibre optic equipment and connectors
• Full duplex 50/125µm type fibre
• Zip twin halogen free cable
• Ceramic connectors ensure low signal loss and high reliability
• Total immunity to electrical and electromagnetic interference (EMI)
• 10 year warranty

• VI-D Single Link Male to DVI-D Single Link Male
• For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
• UXGA (1600 x 1200) and HDTV1080i (1920 x 1080) compatible
• RF-BLOK shielded design
• 10 Year Warranty

LINDY Super Long Distance DVI cables use a specially developed and optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).

Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one