• Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
• Ideal for use as an LCD monitor cable or DVI projector cable
• RF-BLOK shielding design
• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
• 10 Year Warranty

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

• Extend the cable length of up to 4 USB 2.0 devices by 10m
• Supports USB 2.0 HighSpeed transfer rates of up to 480Mbps
• For even greater distances simply connect 2 USB 2.0 Active Extension Hubs in series
• Plug & Play
• 2 year warranty

The Lindy USB 2.0 Active Extension Hub uses built-in active electronics to extend the cable length of up to four USB 2.0 devices by an additional 10m whilst continuing to support data transfer rates of up to 480Mbps. With its USB A male and four USB A female connectors it allows multiple Type A devices such as storage devices, webcams and other Type A devices to be connected at longer distances to PCs, laptops and tablets, while also ensuring flexible positioning.  

Up to 2 USB 2.0 Active Extension Hubs can be chained together to achieve a distance of 20m.

The Lindy USB 2.0 Active Extension Hub is compatible with all USB Type A equipped computers. With plug and play functionality, it can be installed quickly and with minimum fuss. It also features a DC socket for connecting an external power supply (not included) when using USB peripherals which have higher power requirements.

• Gold Plated connectors to prevent oxidisation for maximum reliability
• IEEE 1394b compliant
• Fully moulded

• 4 pin connector also known as i.Link or DV connector

• Color: Transparent
• Length: 3m
• 10 year warranty

With this practical power pack you'll have the correct wall plug for the socket both at home and abroad. Contains 4 exchangeable power supply plugs for Europe, Great Britain, North America and Asia. Support input voltages within the range of 100V to 240V.

• Switching power supply for world-wide employment
• Highly energy efficient during the voltage conversion
• Input: 100-240V AC, 50-60Hz
• Output voltage: 9V DC regulated, up to approx. 0.5A/4.5 Watts
• Standard DC round plug 2.5 inner, 5.5mm outer
• Cable length: approx. 1.4m
• 2 year warranty

• Allows you to connect an eSATA device to a PC or Mac's USB port
• Plugs directly into a USB port and features an eSATA port for connecting the eSATA cable from your device
• USB 2.0 compatible, backwards compatible with USB 1.1
• Complies with Gen 1i & Gen 1m of the Serial ATA II electrical specification
• Supports SATA spread spectrum clock & SATA II asynchronous signal recovery
• Complies with USB mass storage class, bulk only transport specification
• Supplied with 50cm eSATA cable
• Compatible with Windows ME/2000/XP/Vista/7 and Mac OS X
• 2 year warranty

• Full CAT6 specification with moulded snagless boots
• Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

• 6 Pin Mini DIN Male to 6 Pin Mini DIN Female
• Fully moulded
• 10 year warranty

• Attaches to a wall or other surface with the supplied screws
• Incorporates six CAT6, RJ-45 keystone jacks
• Allows for T568A or T568B wiring system
• Requires the use of a punchdown tool
• Cable entry from the opposite side
• Dimensions only approx .: 16.5 x 9.5 x 3 cm
• 2 year warranty

RJ45 plastic wall box with an excellent price/performance ratio, with 6 STP Keystones

Package Contents:

6 Port Wall Mount box

6 STP Keystone jacks

Fixing screws

• 2 x 6 Pin Mini DIN Male & 1 x HD15 Male to 2 x 6 Pin Mini DIN Male & 1 x HD15 Female
• PS/2 connectors are PC99 Color coded
• Innovative locking method
• Reduces cable clutter and tangle
• Reduces the number of cables required by a third making the final solution neat and tidy
• Mouse and keyboard connectors are clearly marked at each end to avoid confusion
• High quality triple shielded S-VGA video cable for optimal video performance
• 10 year warranty

• 2 x ST Fibre Optic Male to 2 x SC Fibre Optic Male

• Compatible with all standard fibre optic equipment and connectors
• Full duplex 62.5/125µm multimode fibre
• Zip twin 2.8mm
• Low Smoke Zero Halogen cable
• Ceramic connectors ensure low signal loss and high reliability
• Total immunity to electrical and electromagnetic interference (EMI)
• Insertion loss: 0.5db (max)
• Includes insertion loss test report
• Color: Grey
• 10 year warranty

• DVI-I Single Link Digital + Analogue Cable
• For use with all standard digital TFT (Thin Film Transistor)/LCD (Liquid Crystal Display) Flat Panel Displays
• Single Link connection supports resolutions of up to 1920 x 1200
• Connectors: DVI-I Single Link Male to DVI-I Single Link Male
• Also available in lengths of 1, 2 and 3m.
• 10 year warranty

Just one of our huge range of DVI cables and DVI leads. For connecting DVI devices at distances of over 10m, use our Super Long Distance DVI Cables.